1 | #
|
---|
2 | # This is a script example, which illustrates the use of topologies in
|
---|
3 | # an experiment scripts
|
---|
4 | #
|
---|
5 | # The scenario of this experiment involves two group of nodes: 'sender' and
|
---|
6 | # 'receiver'. The 'sender' group will generate some broadcast traffic, which will
|
---|
7 | # be received by the 'receiver' group.
|
---|
8 | #
|
---|
9 | # Each group contains nodes that are not explicitly defined within this script, but
|
---|
10 | # rather randomly drawn from the set of active nodes on the tested where this script is
|
---|
11 | # running. In other words, this script example does not specifically name which node belongs to
|
---|
12 | # which group.
|
---|
13 | #
|
---|
14 | # More information on the available commands to define a topology are available on the
|
---|
15 | # following page:
|
---|
16 | # http://www.orbit-lab.org/wiki/Documentation/NodeHandler/Commands/defTopology
|
---|
17 | #
|
---|
18 | # In this example we:
|
---|
19 | # 1) Define a 1st Topology, which will be used to build the 'sender' group of nodes
|
---|
20 | # 2) Define a 2nd Topology, which will be used to build the 'receiver' group of nodes
|
---|
21 | # 3) Define the 'sender' group of nodes
|
---|
22 | # 4) Define the 'receiver' group of nodes
|
---|
23 | # 5) Finally run the experiment
|
---|
24 | #
|
---|
25 |
|
---|
26 | # 1)
|
---|
27 | # Define a topology that will hold the sender node(s) of this experiment
|
---|
28 | #
|
---|
29 | defTopology('senderTopo') { |t|
|
---|
30 | # Load the topology which contains all the active nodes for the
|
---|
31 | # testbed on which this script is running
|
---|
32 | baseTopo = Topology['system:topo:active']
|
---|
33 | # Draw a random node from the pool of active ones
|
---|
34 | aNode = baseTopo.getUniqueRandomNode
|
---|
35 | # Add this random node to this 'senderTopo' topology
|
---|
36 | t.addNode(aNode)
|
---|
37 | }
|
---|
38 |
|
---|
39 | # 2)
|
---|
40 | # Define a topology that will hold the receiver node(s) of this
|
---|
41 | # experiment
|
---|
42 | #
|
---|
43 | defTopology('receiverTopo') { |t|
|
---|
44 | # Load the topology which contains all the active nodes for the
|
---|
45 | # testbed on which this script is running
|
---|
46 | baseTopo = Topology['system:topo:active']
|
---|
47 | # Repeat the following 'receiverNumber' of time
|
---|
48 | for count in 1..4
|
---|
49 | # Draw a random node from the pool of active ones
|
---|
50 | aNode = baseTopo.getUniqueRandomNode
|
---|
51 | # Add this random node to this 'receiverTopo' topology
|
---|
52 | t.addNode(aNode)
|
---|
53 | end
|
---|
54 | }
|
---|
55 |
|
---|
56 | # 3)
|
---|
57 | # Define the 'sender' group for this experiment
|
---|
58 | # This group will include the node(s) from the 'senderTopo' topology
|
---|
59 | # See "HelloWorld" tutorial pages for more info on the following commands
|
---|
60 | #
|
---|
61 | defGroup('sender', 'senderTopo') {|node|
|
---|
62 | node.prototype("test:proto:sender", {
|
---|
63 | 'broadcast' => 'on',
|
---|
64 | 'destinationHost' => '192.168.255.255',
|
---|
65 | 'packetSize' => 1024,
|
---|
66 | 'rate' => 200,
|
---|
67 | 'protocol' => 'udp'
|
---|
68 | })
|
---|
69 | node.net.w0.mode = "Master"
|
---|
70 | node.net.w0.type = "g"
|
---|
71 | node.net.w0.essid = "npc123"
|
---|
72 | node.net.w0.ip = "192.168.0.1"
|
---|
73 | wait 30
|
---|
74 | }
|
---|
75 |
|
---|
76 | # 4)
|
---|
77 | # Define the 'receiver' group for this experiment
|
---|
78 | # This group will include the node(s) from the 'receiverTopo' topology
|
---|
79 | # See "HelloWorld" tutorial pages for more info on the following commands
|
---|
80 | #
|
---|
81 | defGroup('receivers', 'receiverTopo') {|node|
|
---|
82 | node.prototype("test:proto:receiver" , {
|
---|
83 | 'protocol' => 'udp'
|
---|
84 | })
|
---|
85 | node.net.w0.mode = "Managed"
|
---|
86 | node.net.w0.type = "g"
|
---|
87 | node.net.w0.essid = "npc123"
|
---|
88 | node.net.w0.ip = "%192.168.%x.%y"
|
---|
89 | wait 30
|
---|
90 | }
|
---|
91 |
|
---|
92 | # 5)
|
---|
93 | # When all the applications are installed on the nodes in all the groups,
|
---|
94 | # we can start running the applications used in this experiment
|
---|
95 | # See "HelloWorld" tutorial pages for more info on the following commands
|
---|
96 | #
|
---|
97 | whenAllInstalled() {|node|
|
---|
98 | wait 15
|
---|
99 | allGroups.startApplications
|
---|
100 | wait 15
|
---|
101 | Experiment.done
|
---|
102 | }
|
---|
103 |
|
---|