Changes between Version 12 and Version 13 of DSC/ze_calibration

Timestamp:

Feb 18, 2014, 2:36:41 PM (11 years ago)

Author:

seskar

Comment:

—

DSC/ze_calibration

@@ -59 +59 @@
 == Calibration Procedure ==
 
-Calibration procedure is using custom made UHD based program to generate sine wave and collect measurements. This program is available in '''usrp-calibration.ndz'' image. To put the image on a set of arena nodes and turn them on:
+Calibration procedure is using custom made UHD based program to generate sine wave on a transmitter and collect signal strength measurements on a receiver. This program is available in '''usrp-calibration.ndz'' image. To put the image on a set of arena nodes and turn them on execute on the console of the grid:
 {{{
   omf load -t system:topo:dsc-arena -i usrp-calibration.ndz
@@ -65 +65 @@
 }}}
 
-The short calibration procedure and results in the matrices above.
-
-{{{
-  omf exec system:exp:dsc-calibration
-}}}
+The short calibration procedure is OEDL based experiment that operates on the latest set of imaged nodes. It loops over the set and in each iteration uses a single node as a transmitter and all other nodes as receivers. It displays the set of calibration matrices for the various DSC topologies. To get the calibration results:
 
 {{{