Changes between Version 87 and Version 88 of Documentation/CGettingStarted

Timestamp:

Sep 30, 2014, 4:17:09 AM (10 years ago)

Author:

seskar

Comment:

—

Documentation/CGettingStarted

@@ -12 +12 @@
  3.  [[CollapsibleStart(Load an image on the nodes: "omf load -i baseline.ndz -t all")]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
 Prior to executing the "Hello World" experiment, users need to install an image on the hard disks of the nodes. For this tutorial we will use '''baseline.ndz'''. This image is built on top of '''Ubuntu 12.04''', and is pre-configured with the proper modules and start up scripts to take advantage of the rest of the Orbit [wiki:/Software software] / [wiki:/Hardware hardware]. The imaging process will turn the nodes back off after completing imaging. 
- 4. [[CollapsibleStart(Turn the nodes on: "omf tell -a on -t all")]][[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
+ 4. [[CollapsibleStart(Turn the nodes on: "omf tell -a on -t all")]][[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]]
 At this point the nodes disks are imaged with the ''baseline'' image and need to be turned back on before proceeding. Give the nodes a couple of minutes to turn on / boot, then check their status with omf stat
  5. [[CollapsibleStart(Execute experiment with omf: "omf exec test:exp:tutorial:hello-world-wireless -- --res1 node1-1.sb1.orbit-lab.org --res2 node1-2.sb1.orbit-lab.org")]][[Include(Software/cOMF/aExec)]][[CollapsibleEnd]]