Changes between Version 17 and Version 18 of Hardware/bDomains/cSandboxes/dSB4


Ignore:
Timestamp:
Mar 2, 2012, 5:26:49 PM (13 years ago)
Author:
nilanjan
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/bDomains/cSandboxes/dSB4

    v17 v18  
    1010
    1111This service controls the RF attenuator matrix. Since there are a total of nine (9) input/output ports on the attenuator matrix, the first 8 input/output ports are connected to nodes 1 thru 8, respectively. The 9th input/output port is connect to the Wimax base station (BS). So in a nutshell
    12  * RF attenuator matrix port 1 ----> node1-1
    13  * RF attenuator matrix port 2 ----> node1-2
    14  * RF attenuator matrix port 3 ----> node1-3
    15  * RF attenuator matrix port 4 ----> node1-4
    16  * RF attenuator matrix port 5 ----> node1-5
    17  * RF attenuator matrix port 6 ----> node1-6
    18  * RF attenuator matrix port 7 ----> node1-7
    19  * RF attenuator matrix port 8 ----> node1-8
    20  * RF attenuator matrix port 9 ----> Wimax BS
     12 || RF Matrix Port || Attached device || Additional attenuation values ||
     13 || 1 || node1-1 || * ||
     14 || 2 || node1-2 || * ||
     15 || 3 || node1-3 || * ||
     16 || 4 || node1-4 || * ||
     17 || 5 || node1-5 || * ||
     18 || 6 || node1-6 || * ||
     19 || 7 || node1-7 || * ||
     20 || 8 || node1-8 || * ||
     21 || 9 || wimax BS || * ||
    2122
    2223Attenuation values between the eight (8) nodes and the BS can be controlled individually with the following URL commands listed below.