Changes between Version 35 and Version 36 of Hardware/bDomains/cSandboxes/dSB4


Ignore:
Timestamp:
Aug 5, 2015, 8:05:37 PM (9 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/bDomains/cSandboxes/dSB4

    v35 v36  
    66  || [[Image(SB4.jpg, 600px, align=center)]] || [[Image(IMG_0376.jpg, 200px)]] ||
    77
    8 As can be seen in figure 1, there are a total of nine (9) input/output ports on the transceiver test system. The first 7 input/output ports are connected to nodes 1 thru 7, respectively while the 8th and 9th input/output ports are connect to  either nodes 1-8 and 19 or the two Wimax base stations (BS1 and BS2). The selection of ports 8 and 9 is controlled through [wiki:/Software/eAM/mInstr Instrumentation AM] service.
     8As can be seen in figure 1, there are a total of nine (9) input/output ports on the transceiver test system. The first 7 input/output ports are connected to nodes 1 thru 7, respectively while the 8th and 9th input/output ports are connect to  either nodes 1-8 and 19 or the two Wimax base stations (BS1 and BS2). The selection of devices attached to ports 8 and 9 is controlled by [wiki:/Software/eAM/mInstr Instrumentation AM] service.
    99
    1010 || RF Test System Port || Attached device ||