Changes between Version 16 and Version 17 of Hardware/dInfrastructure/qPowerMeasurment

Timestamp:

Aug 23, 2013, 11:43:18 PM (12 years ago)

Author:

pavan717

Comment:

—

Hardware/dInfrastructure/qPowerMeasurment

@@ -105 +105 @@
 
 || [[Image(Node Mapping.PNG, 400px)]] ||
-|| Figure : Chip Off-Set  || 
+|| Figure : The Grid  || 
 [[BR]]
 
-The numbers in the blue circle above represent each outlet, approximately 3 outlets are connected to a single breaker switch.  The outlets are numbered because they have to be mapped to the proper breaker switch. Because 4 nodes are connected to a single outlet, the mapping was done by turning on/off 4 nodes at a single outlet and reading & recording the power the spike at any breaker switch to determine which breaker switch was connected to which outlet.  
+The numbers in the blue circle above represent each outlet, approximately 3 outlets are connected to a single breaker switch.  The outlets are numbered because they have to be mapped to the proper breaker switch. Because 4 nodes are connected to a single outlet, the mapping was done by turning on/off 4 nodes at a single outlet and reading & recording the power the spike at any breaker switch to determine which breaker switch was connected to which outlet. [[BR]]
+
+|| [[Image(Mapping Results.PNG, 300px)]] ||
+|| Figure : Node Mapping Results  || 
+[[BR]]