| | 7 | |
| | 8 | For use as console: |
| | 9 | Making Switch: |
| | 10 | |
| | 11 | 1. Take switch from bin |
| | 12 | 2. Cut 4 wires, 24awg, 2 black, 1 blue, 1 red |
| | 13 | 3. Strip ends of wires, short on 1 side, about 1cm on other |
| | 14 | 4. crimp short molex pins onto ends |
| | 15 | 5. solder other ends to switch. |
| | 16 | 1. Blue to terminal by mark (led positive) |
| | 17 | 2. Black opposite it. |
| | 18 | 3. Other two terminals get red and black, orientation doesn't matter. (switch) |
| | 19 | 6. cut heat shrink to length, slide over wires down to terminal |
| | 20 | 7. shrink |
| | 21 | 8. twist wire pairs to keep separate |
| | 22 | 9. plug pins into molex terminals. |
| | 23 | 1. red/black to 2 pin |
| | 24 | 2. blue/black to ends of 3 pin |
