Changes between Version 13 and Version 14 of Hardware/jCM/dCM3/bHardware


Ignore:
Timestamp:
Jun 14, 2011, 2:42:15 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/bHardware

    v13 v14  
    99 ==== Lantronix XPort AR ====
    1010The Xport AR is an embedded device server, produced by Lantronix. It runs off of the [http://www.lantronix.com/device-networking/utilities-tools/evolution.html Evolution OS®], combined with the custom software written using the Xport AR SDK. The Xport AR acts as the 'brains' of the CM3, handling all the networking tasks, as well the link between the CMC instruction commands, and the physical interface to the node. It has the following basic features:
    11 || '''Architecture''' ||
     11|| '''Architecture'''                                                               ||
    1212||CPU              || Based on the DSTni-EX enhanced 16-bit, 120MHz x86 Architecture||
    1313||Memory           || 1.25 MB RAM and 4 MB FLASH||