Changes between Version 14 and Version 15 of Hardware/jCM/dCM3/cSoftware


Ignore:
Timestamp:
Dec 16, 2011, 9:24:18 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/cSoftware

    v14 v15  
    6060  c. Make sure that the "Erase all flash" option is checked
    6161  d. Enter the path of the image to be loaded
    62 [[Image(serial_recovery.jpg, 600px)]]
     62[[Image(http://www.orbit-lab.org/attachment/wiki/Hardware/cCM/cCM3/04-Reimage/serial_recovery.jpg, 600px)]]
    6363 4. The program will prompt you to power off the device, you can just ignore this and hit next
    6464 5. The serial recovery will have started, but you must still power cycle the device before the transfer begins, either hit the reset button on the CM or just pull and reapply the power to the CM.