Changes between Version 27 and Version 28 of Hardware/jCM/dCM3/dUsage


Ignore:
Timestamp:
Jun 9, 2017, 7:56:02 PM (7 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/dUsage

    v27 v28  
    112112===== Serial to Telnet tunnel =====
    113113 
    114 Telnet to IP address of CM and you will get access to serial console of the node. The default serial settings for the serial-to-telnet tunnel are:
     114Telnet to IP address of CM (eg. for node1-1, do {{{telnet cons1-1}}} from the testbed's console) and you will get access to serial console of the node. This will allow you to do basic command line level repair of the node to regain SSH connectivity. The default serial settings for the serial-to-telnet tunnel are:
    115115|| Baud || 115200 ||
    116116|| Parity || None ||
    117117|| Data Bits || 8 ||
    118 || Stop Bits|| 2 ||
     118|| Stop Bits || 1 ||
    119119|| Flow Control || None ||
    120120