Changes between Version 21 and Version 22 of Hardware/jCM/dCM3


Ignore:
Timestamp:
Jun 12, 2011, 8:35:26 AM (13 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3

    v21 v22  
    1 [[TOC(Hardware/CM/cCM3/*, depth=2)]]
    2 = Third Generation Chassis Manager =
     1[[TOC(Hardware/CM/*, depth=2)]]
     2
     3= III. Chassis Manager Version 3 (CM3) =
     4
    35This is the block diagram for the third generation chassis manager.
     6
     7[[Image(CM3.jpg)]]
     8
    49== Overview ==
    510
    … …  
    1116
    1217The entire CM3 will is small enough to be mounted inside the case of the Orbit nodes and is powered off of the 5V standby voltage from the node power supply. The CM is also able to communicate through serial in either crossover or straight cable settings by configuring jumpers, and through a standard DB9 connector or a 5x2 0.1" spaced header.
    13 == Details ==
    14 [wiki:Hardware/CM/Requirements Requirements][[BR]]
    15 [wiki:Hardware/CM/cCM3/01-HardwareDescription Hardware Description][[BR]]
    16 [wiki:Hardware/CM/cCM3/02-SoftwareDescription Software Description][[BR]]
    17 [wiki:Hardware/CM/cCM3/03-Usage Using the Device][[BR]]
    18 [wiki:Hardware/CM/cCM3/Reimage Reimaging the CM3 module][[BR]]
    19 [[Image(CM3.jpg, bottom)]]
    2018
     19