Changes between Version 22 and Version 23 of Hardware/jCM/dCM3


Ignore:
Timestamp:
Jun 12, 2011, 8:40:40 AM (13 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3

    v22 v23  
    33= III. Chassis Manager Version 3 (CM3) =
    44
     5== Introduction ==
     6
    57This is the block diagram for the third generation chassis manager.
    68
    79[[Image(CM3.jpg)]]
    8 
    9 == Overview ==
    1010
    1111The goal of the third generation chassis management project is to develop a full featured CM platform using the Lantronix XPort AR module rather than he Rabbit RCM3700 as the principle component. The Lantronix Xport AR is an embedded device with Ethernet connectivity, a full API allowing for network programming, and a full featured TCP/IP protocol stack, all in a single package. It has serial communications built it making it easy to implement a Ethernet to serial tunnel and 11 general purpose I/O pins which will act as sensing inputs, and control pins for powering the Orbit nodes on and off, as well as monitoring their status.