Changes between Version 3 and Version 4 of Internal/Infrastructure/OMF/NodeHandler/Applications/SaveNode


Ignore:
Timestamp:
Apr 8, 2008, 7:34:05 PM (17 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/Infrastructure/OMF/NodeHandler/Applications/SaveNode

    v3 v4  
    11
    2 Go back --> [wiki:Documentation] --> [wiki:Internal/Infrastructure/NodeHandler !NodeHandler]
     2Go back --> [wiki:Documentation] --> [wiki:Internal/Infrastructure/NodeHandler NodeHandler]
    33
    44
    … …  
    2525}}}
    2626
    27 Imaging process starts by the request from the nodehandler to the PXE grid service to set the tftp server to [wiki:Internal/Infrastructure/PXEService provide the PXE image] for the node's IP address. The nodehandler will then request the specified node to reboot itself (trough CMC Grid Service request) and thus load that PXE image into RAM (see [wiki:Internal/Infrastructure/PXEImage]).  Once the node checks in with the PXE's nodeagent, the nodehandler will ask the node's nodeagent to save the current image it has loaded on disk by issuing the following command (TCP port 9006):
     27Imaging process starts by the request from the nodehandler to the [wiki:Internal/Infrastructure/OMF/PXEGridService PXE grid service] to set the tftp server to [wiki:Internal/Infrastructure/PXEService provide the PXE image] for the node's IP address. The nodehandler will then request the specified node to reboot itself (trough CMC Grid Service request) and thus load that PXE image into RAM (see [wiki:Internal/Infrastructure/PXEImage]).  Once the node checks in with the PXE's nodeagent, the nodehandler will ask the node's nodeagent to save the current image it has loaded on disk by issuing the following command (TCP port 9006):
    2828
    2929{{{