| | 1 | The lv-678 working bios version is 11c1. It can be installed by using the USBboot disk Documented here |
| | 2 | [wiki:Internal/USBBoot] This is the “latest” bios and it works however there are a few caveats. |
| | 3 | |
| | 4 | 1. The 2nd (eth1) interface CANNOT Pxe boot. It will crash. |
| | 5 | 1. Since the bios settings are VERY sensitive to what the paramters are set to I’ve made a copy of it on the CMOS backup disk (lv678-9-29-2011). The bios settings names are not properly mapped to the flags they set, so changing some parameters has no effect, while changing others causes unexpected behavior. |
| | 6 | 1. As of now the working configuration has both pxeroms enabled, but only boots from IBA GBE 20. The second and Third boot device are USB DEVICE and HARD DISK respectively. |
