= ORBIT Network =

== Subnets and VLANs ==

|| VLAN || Subnet || Description ||
|| 1 || 172.16.0.0/255.255.0.0 || Network management ||
|| 2 || 10.0.0.0/255.255.0.0 || Internal ||
|| 3 || 10.1.0.0/255.255.0.0 || CM ||
|| 4 || 10.2.0.0/255.255.0.0 || Monitoring ||
|| 5 || 10.3.0.0/255.255.0.0 || Instrumentation ||
|| 6 || 10.50.0.0/255.255.0.0 || DMZ ||
|| 11 || 10.11.0.0/255.255.0.0 || SB1 Control || 
|| 12 || 10.21.0.0/255.255.0.0 || SB1 Data ||
|| 13 || 10.12.0.0/255.255.0.0 || SB2 Control || 
|| 14 || 10.22.0.0/255.255.0.0 || SB2 Data ||
|| 15 || 10.13.0.0/255.255.0.0 || SB3 Control || 
|| 16 || 10.23.0.0/255.255.0.0 || SB3 Data ||
|| 17 || 10.14.0.0/255.255.0.0 || SB4 Control || 
|| 18 || 10.24.0.0/255.255.0.0 || SB4 Data ||
|| 19 || 10.15.0.0/255.255.0.0 || SB5 Control || 
|| 20 || 10.25.0.0/255.255.0.0 || SB5 Data ||
|| 21 || 10.16.0.0/255.255.0.0 || SB6 Control || 
|| 22 || 10.26.0.0/255.255.0.0 || SB6 Data ||
|| 23 || 10.17.0.0/255.255.0.0 || SB7 Control || 
|| 24 || 10.27.0.0/255.255.0.0 || SB7 Data ||
|| 25 || 10.18.0.0/255.255.0.0 || SB8 Control || 
|| 26 || 10.28.0.0/255.255.0.0 || SB8 Data ||
|| 27 || 10.19.0.0/255.255.0.0 || SB9 Control || 
|| 28 || 10.29.0.0/255.255.0.0 || SB9 Data ||
|| 29 || 10.40.0.0/255.255.0.0 || Outdoor control ||
|| 30 || 10.41.0.0/255.255.0.0 || Outdoor data    || 
|| 31 || 10.71.0.0/255.255.0.0 || VGRID 1 control ||
|| 32 || 10.81.0.0/255.255.0.0 || VGRID 1 data    || 
|| 33 || 10.72.0.0/255.255.0.0 || VGRID 2 control ||
|| 34 || 10.82.0.0/255.255.0.0 || VGRID 2 data    || 
|| 35 || 10.73.0.0/255.255.0.0 || VGRID 3 control ||
|| 36 || 10.83.0.0/255.255.0.0 || VGRID 3 data    || 
|| 37 || 10.74.0.0/255.255.0.0 || VGRID 4 control ||
|| 38 || 10.84.0.0/255.255.0.0 || VGRID 4 data    ||

== Network Monitoring ==

=== OPENNMS ===

=== Netdisco ===

Tool for switch crawling and port connectivity detection. Available at http://internal3/netwdisco .

We needed latest SNMP-Info from sourceforge:
(unfortunately since it is perl based it installed stuff in /usr/local/... by default)

{{{
 cvs -z3 -d:pserver:anonymous@snmp-info.cvs.sourceforge.net:/cvsroot/snmp-info co -P
 cd snmp-info
 perl Makefile.pl
 make install
}}}

To find a machine go to the http://internal3/netdisco/node.html and type in MAC address and it will show you all the network devices that know about it.