Changes between Version 14 and Version 15 of Internal/OpenFlow/CLISetup

Timestamp:

Aug 27, 2009, 11:02:47 PM (15 years ago)

Author:

seskar

Comment:

Name changed from Documentation/OpenFlow/CLISetup to Internal/OpenFlow/CLISetup

Internal/OpenFlow/CLISetup

@@ -105 +105 @@
 == switch as DHCP server ==
 The switch can be a DHCP server, so it was made so the laptop that'll be used to test if the telnet configs worked would get an address from the switch. This was later disabled since hosts on this switch would acquire IP addresses from a designated DHCP server.
-The commands for making the switch a DHCP server is [wiki:Documentation/OpenFlow/SwitchConfiguration here].
+The commands for making the switch a DHCP server is [wiki:Internal/OpenFlow/SwitchConfiguration here].
 
 == The right way to flash the switch (6/16) ==
-The specific how-to's are on [wiki:Documentation/OpenFlow/Firmware another article], but the general gist is to copy the firmware, license, and configuration files onto a SD card provided by NEC, and cold booting the switch off of it.   
+The specific how-to's are on [wiki:Internal/OpenFlow/Firmware another article], but the general gist is to copy the firmware, license, and configuration files onto a SD card provided by NEC, and cold booting the switch off of it.   
 
 == VLAN Configuration, based on convention (6/23) == 
@@ -164 +164 @@
 
 == DHCP/BootP relay agent (6/24) ==
-attempt was made but not knowing the DHCP server's address didn't help. Nevertheless, translations on how to set up a relay agent/ IP helper are [wiki:Documentation/OpenFlow/SwitchConfiguration here].
+attempt was made but not knowing the DHCP server's address didn't help. Nevertheless, translations on how to set up a relay agent/ IP helper are [wiki:Internal/OpenFlow/SwitchConfiguration here].
 
 == Native VLAN configuration (6/25) ==
@@ -307 +307 @@
 [[BR]]
 
-[wiki:Documentation/OpenFlow/  Go back to OpenFlow index]
+[wiki:Internal/OpenFlow/  Go back to OpenFlow index]