Changes between Version 29 and Version 30 of Internal/OpenFlow/CLISetup


Ignore:
Timestamp:
Jan 28, 2010, 6:44:31 AM (15 years ago)
Author:
akoshibe
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/OpenFlow/CLISetup

    v29 v30  
    11
    2 == Elucidation (Or, How-TO's) ==
     2= Configuring the switch through command line interface (CLI) =
    33
    44The IP8800/S3640-48T2XW and IP8800/S3640-24T2XW are the two models of NEC switch that support !OpenFlow. "Smart" switches like the IP8800 must be configured via a command line before they can be used.
    … …  
    88 * You are running/know how to get around Linux (We are, for the most part, using Ubuntu unless specified)
    99 * You are using the NEC IP8800/S3640-48T2XW switch.   
    10  * You know network models (e.g. TCP/IP, OSI)
     10 * You know network models (e.g. TCP/IP, OSI) 
    1111
    1212----
    … …  
    443443
    444444----
    445 
    446 == Access Lists and SNMP ==
    447 === SNMP (8/13) ===
     445----
     446== Section 2: Access Lists and SNMP ==
     447
     448=== ACLs (Access Control Lists) ===
     449ACLs keep your switch secure by setting permissions about who can access the CLI. These permissions are set based on IP addresses. The ACL is basically a list of IP address blocks paired with group names stating which IP address blocks are able to communicate with the switch. Access Lists are manipulated using the "access-list" context.
     450   
     451=== SNMP  ===
    448452For a explanation of SNMP: http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol [[BR]]
    449453In the IP8800 guide: http://www.nec.co.jp/ip88n/s36_sw/html/cfguide2/index.html [[BR]]