Changes between Version 17 and Version 18 of Internal/OpenFlow/QuantaSetup

Timestamp:

Jun 20, 2011, 3:39:25 PM (13 years ago)

Author:

akoshibe

Comment:

—

Internal/OpenFlow/QuantaSetup

@@ -318 +318 @@
 If the switch can boot from the CF Card, choosing the system shell will give you access to a shell that will let you poke around the CF card. It should be mounted as the /cf_card directory. 
   
-== IV OpenFlow Switching == #IV
+== IV !OpenFlow Switching == #IV
 This section provides example uses of the u-Boot facilities for manipulating the !OpenFlow properties of the LB9A. We will also introduce the ORBIT Grid Service facilities that can be used to configure the switch without dealing with the gory details of u-boot (given the switch has the proper firmware, that is).
  
@@ -492 +492 @@
 ===== -- ===== #bottom
 ^1. I honestly don't know what it does.^ [[BR]]
-^2. These are educated guesses through observation, and by no means guaranteed to be what is actually happening. If anyone has an actual explanation I'd be very happy to learn about it.^
-^3. The importance was demonstrated by a mix-up between the -b and -d flags for `copy`, which happily overwrote u-boot with the device tree, bricking the switch.^
-^4. There are no sarcasm tags in Wiki notation.^ 
+^2. These are educated guesses through observation, and by no means guaranteed to be what is actually happening. If anyone has an actual explanation I'd be very happy to learn about it.^ [[BR]]
+^3. The importance was demonstrated by a mix-up between the -b and -d flags for `copy`, which happily overwrote u-boot with the device tree, bricking the switch.^ [[BR]]
+^4. There are no sarcasm tags in Wiki notation.^ [[BR]]