Changes between Version 1 and Version 2 of Internal/OpenFlow/XORP

Timestamp:

Jan 23, 2011, 12:33:59 AM (14 years ago)

Author:

akoshibe

Comment:

—

Internal/OpenFlow/XORP

@@ -23 +23 @@
 XorPlus# save running-to-startup
 }}}
+
+== Commands. ==
+ * To power off the switch
+{{{
+XorPlus> request system power-off 
+}}}
+ * To get to the configuration prompt as enabled user - `configure`
+ * for a list of available options for a specific set of commands, type "?" or "help" at any point:
+{{{
+XorPlus# run ?
+Possible completions:
+  clear                         Clear information in the system
+  file                          Perform file operations
+  ping                          Ping remote target
+  request                       Make system-level requests
+  set                           Set parameters of the system
+  show                          Show system information
+  ssh                           Connect to another host via SSH
+  start                         Start shell
+  syslog                        System logging
+  telnet                        Connect to another host via telnet
+  traceroute                    Trace route to remote host
+}}}
+ * To execute non-config CLI commands from enabled mode, use `run <parameters>` (choices are shown above) 
+ * Setting interface parameters - The GBe ports are named ge-1/1/n, n from 1 to 48. To configure them:
+{{{
+XorPlus# set interface gigabit-ethernet ge-1/1/4XorPlus> request system power-off 7 family ethernet-switching <port mode, vlan id, ect. here>
+}}}
+
+== Multiport configurations. ==
+!XorPlus doesn't seem to let you configure more than one port at a time. This is a pain (e.g. for setting the native vlans for all of the ethernet ports). A quick way to get to config many ports at a time is to echo commands into the serial device (/dev/ttyS0 or /dev/ttyUSB0 - what you used to connect to the switch). For example, to set the vlans for all the interfaces to 8:
+[[BR]][[BR]]
+At your terminal, as root:
+{{{
+# echo "set vlans vlan-id 8" >> /dev/ttyS0
+# for i in `seq 1 48`; do echo "set interface gigabit-ethernet ge-1/1/$i family ethernet-switching native-vlan-id 8"; done >> /dev/ttyS0
+}}}
+Then, at the switch CLI:
+{{{
+XorPlus# set interface gigabit-ethernet ge-1/1/47 family ethernet-switching native-vlan-id 1
+XorPlus# set interface gigabit-ethernet ge-1/1/47 family ethernet-switching vlan members 8
+XorPlus# commit
+XorPlus# save running-to-startup
+}}}