Changes between Version 3 and Version 4 of Internal/SESMF

Timestamp:

May 15, 2017, 3:46:46 PM (8 years ago)

Author:

msherman

Comment:

—

Internal/SESMF

@@ -60 +60 @@
 32767:  from all lookup default 
 }}}
+ * Tunnel setup
+  * In native's home directory, there is a file {{{tunnel.sh}}}
+  * This runs on boot, and sets up both L2TP tunnels to landing1, as well as routes.
+  * This script is symlinked to from {{{/etc/init.d}}} and was set to run on boot with {{{update-rc.d tunnel defaults}}}
+  * Contents of script:
+{{{
+#!/bin/bash
 
+#sets up tunnel via terrestrial link
+#remote ip for landing 1 is 128.6.192.147
+#local IP for ses1 is ???.???.???.???
+#ip address for tunnel to MF at Winlab is 
+#mf1.outdoor.orbit-lab.org 10.41.0.54
+#ses1 10.41.0.55
+#ses2 10.41.0.56
+
+modprobe l2tp_eth
+#ground
+ip l2tp del tunnel tunnel_id 1
+ip l2tp add tunnel remote 128.6.192.147 local 23.24.73.161 \
+        tunnel_id 1 peer_tunnel_id 5 udp_sport 3004 udp_dport 3004 encap udp
+ip l2tp add session name ses_ground \
+        tunnel_id 1 session_id 1 peer_session_id 1
+ip link set ses_ground up mtu 1500
+ip r add 128.6.192.147 via 23.24.73.166
+ip addr add 10.100.200.55/16 dev ses_ground
+ping 10.100.200.53 -c 10
+
+#satelite
+ip l2tp del tunnel tunnel_id 2
+ip l2tp add tunnel remote 128.6.192.147 local 216.226.242.242 \
+        tunnel_id 2 peer_tunnel_id 6 udp_sport 3005 udp_dport 3005 encap udp
+ip l2tp add session name ses_sat \
+        tunnel_id 2 session_id 1 peer_session_id 1
+ip link set ses_sat up mtu 1500
+ip route add 128.6.192.147 via 216.226.242.241 table sat
+ip rule add from 216.226.242.242/32 table sat
+
+#ip r add 128.6.192.147 via 216.226.242.241
+
+#ip addr add 10.100.200.55/16 dev ses_ground
+#ping 10.100.200.54 -c 10
+}}}
 
 = Desired Final Configuration =