Version 2 (modified by 8 years ago) ( diff ) | ,
---|
Current Demo Setup for SES and MF
Networks
- Satelite link
- Each machine connected directly to a sat modem has a /30 public ip, with the modem as gateway. Some L2 packets appear to pass, but not reliably? To compensate, L2TP tunnels are used.
- SES_SAT is the tunnel interface, between each site and landing1.orbit-lab.org.
- This tunnel is bridged to vlan 31, outdoor data, on landing1.
- Terrestrial link
- This link operates over the public internet. In order to pass L2 traffic, an L2TP tunnel to landing1.orbit-lab.org is used.
- This tunnel is bridged to vlan 3701, GENI MF, on landing1.
Machines
- node4-3.outdoor.orbit-lab.org
- Eth0: Outdoor data, 10.41.4.3/16
- Eth0.3701: MF vlan, bridged to geni sites, 10.100.200.53/16
- Eth1: Outdoor Control, 10.40.4.3/16
- Eth2: Direct connection to satelite modem port 1, 216.226.242.246/30
- mf1.outdoor.orbit-lab.org
- em1: was direct connection to sat modem, currently disconnected.
- em2: outdoor control, 10.40.0.53/16
- p2p1: Geni MF vlan, 3701. Terrestrial tunnel Link, 10.100.200.54/16
- p2p2: Outdoor data, vlan 31, sat tunnel link, 10.41.200.54/16
- ses1
- em1: sat link
- ip: 216.226.242.242/30
- em2: public internet link
- ip: 23.24.73.161
- ses_ground: tunnel for ground link, over em2
- ip: 10.100.200.55/16
- ses_sat: tunnel for sat link, over em1
- 10.41.200.55/16
- em1: sat link
Desired Final Configuration
Note:
See TracWiki
for help on using the wiki.