= How to build a SandBox console = ''' Updating for 14.04, 06/12/2015 ''' The core packages can be installed as a group via this command: {{{ sudo apt-get install logwatch logrotate nfs-common libpam-ldap libnss-ldap cfengine3 emacs ntp fail2ban }}} Instead of individually. LDAP questions are answered below. ''' Base system ''' 1. Boot Ubuntu 14.04 Server installation medium (you may need a usb-cdrom). 1. perform a standard installation using the installation defaults, with noted deviations: 1. Partition - Choose "Guided use entire disk" (No LVM) 1. User Name / Password - Use the well known orbit default 1. Roles - Add the ssh server role 1. Check that the network interfaces get the correct address from the correct networks: 1. em1 - DMZ 1. em2 - Control ''' NFS Mounting ''' We no longer do AutoFS/auto.home since there is a long standing lag bug with the daemon that is not fixable. We've now move to direct mounting of the /home mount point. 1. add the follow line to '''/etc/fstab''' {{{ home:/export/home /home nfs _netdev,auto 0 0 }}} If you are migrating from autofs, you will need to disable autofs on startup. In some cases this is managed by upstart. A reference for removing upstart services can be found [http://askubuntu.com/questions/171798/remove-services-from-upstart here]. In ubuntu 10.04 modify /etc/init/autofs.conf and change the start on line to {{{ start on never }}} ''' LDAP Authentication ''' Since Autofs is not use this process is some what simpler. 1. Install ldap libraries. This process will ask you a bunch of ldap related questions that will be used to prime the ldap.confs (there are 2). It's not critical to get them correct as we're just going to replace those conf's any way. (Accepting the defaults is ok). 1. The '''/etc/ldap.conf''' is one of two files that configures the ldap client. The non-comment lines in this file are as follows: {{{ base dc=orbit-lab,dc=org uri ldap://ldap.orbit-lab.org/ ldap_version 3 binddn rootbinddn cn=admin,dc=orbit-lab,dc=org pam_password md5 nss_initgroups_ignoreusers backup,bin,daemon,games,gnats,irc,libuuid,libvirt-qemu,list,lp,mail,man,messagebus,news,ntp,postfix,proxy,root,sshd,statd,sync,sys,syslog,usbmux,uucp,www-data }}} You could edit this file and change all the values to reflect this (leaveing the rest as comments) or simply replace the one you have with this [attachment:ldap.conf one]. You can also check the non-comment lines by executing: {{{ egrep -v "^#|^$" /etc/ldap.conf }}} 1. The '''/etc/ldap/ldap.conf''' is the second file that guides the client. It have very few actual lines: {{{ BASE dc=orbit-lab,dc=org URI ldap://ldap.orbit-lab.org }}} Again you can edit it directly or copy this [attachment:ldap.2.conf version]. 1. The '''/etc/nsswitch.conf''' file should have the follow non comment lines: {{{ passwd: files ldap compat group: files ldap compat shadow: files compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis }}} Again you can edit it directly or copy this [attachment:nsswitch.conf version]. 1. Copy or create the '''/etc/ldap.secret''' file 1. Finally add the follow line to the '''/etc/sudoers''' file (note this is done with the visudo command). {{{ %admin ALL=(ALL) ALL %sysadmin ALL=NOPASSWD: ALL }}} This has to be done manually. 1.Configure networking for the node facing interface of the console e.g.: {{{ auto eth1 iface eth1 inet static address 10.14.0.10 netmask 255.255.0.0 }}} 15. We need to make sure machine have fully qualified host name (some services depend on it). So: {{{ echo "console.sb4.orbit-lab.org" > /etc/hostname }}} 15. also set domainname (hostname SHOULD NOT be fqdn. Needs fixing.) domainname should be set in /etc/hosts ''' OMF / OML ''' The Orbit measurement framework binaries. 1. Comparing to a running Console, the apt repositories are: {{{ deb http://pkg.mytestbed.net/ubuntu karmic/ deb http://pkg.mytestbed.net/ubuntu lucid/ deb http://pkg.mytestbed.net/ubuntu maverick/ deb http://pkg.mytestbed.net/ubuntu natty/ deb http://pkg.mytestbed.net/ubuntu oneiric/ deb http://pkg.mytestbed.net/ubuntu precise/ }}} 1. The installed packages are: {{{ ii omf-aggmgr-5.3 5.3.1-ubuntu3 OMF Aggregate Manager ii omf-common-5.3 5.3.1-ubuntu3 Common ruby classes for OMF ii omf-common-5.4 5.4.2-ubuntu2 Common ruby classes for OMF ii omf-expctl-5.3 5.3.1-ubuntu6 OMF Experiment Controller ii omf-expctl-5.4 5.4.2-ubuntu2 OMF Experiment Controller ii liboml2-0 2.8.1-ubuntu2 OML: The Orbit Measurement Library ii oml2-server 2.8.1-ubuntu2 OML measurement server }}} 1. Before I could install all those packages, I needed to install this library. {{{ wget http://ubuntu.media.mit.edu/ubuntu//pool/universe/libx/libxmpp4r-ruby/libxmpp4r-ruby1.8_0.5-1_all.deb dpkg -i libxmpp4r-ruby1.8_0.5-1_all.deb wget http://ubuntu.media.mit.edu/ubuntu//pool/universe/libx/libxmpp4r-ruby/libxmpp4r-ruby_0.5-1_all.deb dpkg -i libxmpp4r-ruby_0.5-1_all.deb }}} For the console we need to OMF packages; please try and install the latest release also [[BR]] {{{ apt-get install omf-expctl-5.4 omf-aggmgr-5.4 oml2-server }}} 13. OMF Configuration Copy a working config file for /etc/omf-expctl-5.X/omf-expctl.yaml from another sandbox and modify its ip addresses and the domain name. The XMPP server is xmpp for 5.3 and xmpp2.orbit-lab.org for 5.4. Configure omf-aggmgr-5.X to enable result service by creating file in /etc/omf-aggmgr-5.X/available/result.yaml with {{{ --- result: # Path to the SQLite3 client binary sqlite3_path: '/usr/bin/sqlite3' # Path to the directory holding the experiment measurement databases database_path: '/var/lib/oml2' }}} and then link it: {{{ cd /etc/omf-aggmgr-5.3/enabled; ln -s ../available/result.xml }}} 14. 14. Copy authorized keys to new console. 14. Install the cfengine3 package and then copy {{{ sudo scp /etc/cfengine3/*.cf console.??:/etc/cfengine3/ }}} 15. from dhcp1: * delete pub key if for the console's ip if it exists. * sudo scp /var/lib/cfengine3/ppkeys/root-10.0.0.9.pub console.??:/var/lib/cfengine3/ppkeys/ 16. Run cf-agent on the console we're installing. {{{ cf-agent -v }}} ---- ''' OS specific notes ''' '''Ubuntu 13.10 ''' The passwd command in fails after follwing these instructions. There is a minor tweak needed to get the passwd command to work. Edit the ''/etc/pam.d/common-password'' and find this line: {{{ password [success=1 user_unknown=ignore default=die] pam_ldap.so use_authtok try_first_pass }}} '''remove use_authtok''', then reboot. This should solve the problem. It documented [http://ubuntuforums.org/showthread.php?t=1640070 here]