Soekris Manual

​http://soekris.com/Manuals/net4801_manual.pdf

boot infrastructure

The netboot image for debian is already around. You need

wget ​http://centerclick.org/net4801/pxelinux/pxelinux.0.gz

as opposed to the pxelinux.bin that's already around. You need to make a link in pxelinux.cfg to an appropriate pxelinux configuration file, namely the one for serial. To the end of the 'install' image you want to add:

DEBIAN_FRONTEND=text

(we did this, so it's probably already there.)

Minicom should be set for 9600 baud, 8 databits, no parity, 1 stop bit, no flow control. Turn hardware flow control off in minicom. The UNIX device for talking to the console is almost certainly /dev/ttyS0.

configure the Soekris net4801 BIOS

Look at the banner from when the net4801 boots. Get the BIOS version and check it against the Soekris web site.

Hit C-p as it is booting to get to a BIOS prompt.

Issue these commands at the BIOS prompt, filling in today's date and the current time.

date YYYY/MMDD time HH:MM:SS set ConSpeed=9600 set BootDrive=F0 FF 80 81

The only reliable way to obtain the MAC address of 'Eth 0', without having an operating system already loaded, is to watch the diagnostic output of

boot f0