Changes between Version 1 and Version 2 of Internal/Teltonika


Ignore:
Timestamp:
Jul 10, 2012, 2:48:43 PM (13 years ago)
Author:
dmeyer@…
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/Teltonika

    v1 v2  
    1 = Teltonika UM62x1 =
    2 
    3 [http://www.teltonika.lt/en/pages/view/?id=1010 Teltonika UM62x1]
    4 
    5 == How To's ==
    6 
    7 === Linux ===
    8 
    9 Device will look like a cdrom
    10 
    11 {{{
    12 eject
    13 }}}
    14 
    15 If you install usb-modeswitch and usb-modeswitch-data then it will appear as a network interface and not USB storage by default, and you won't need to "eject" the device.
    16 
    17 
    18 Can use:
    19 
    20 {{{
    21 wget --http-user admin --http-password admin -qO - http://192.168.0.1/cgi/cli?[command]
    22 }}}
    23 See data collection below for how to find a list of commands.
    24 
    25 === Embedded Linux ===
    26 
    27 Verified working with Openwrt on Routerstation Pro.
    28 
    29 TODO:  Complete kernel module list.
    30 Kernel has to be compiled with cdc_ether, scsi cdrom
    31 
    32 If using Openwrt, compile busybox with eject command or dmesg to find out what the device shows up as:
    33 
    34 {{{
    35 opkg update
    36 opkg install sdparm
    37 sdparm --command=eject /dev/sg? 
    38 }}}
    39 
    40 Then use the above Linux tutorial.
    41 
    42 === Windows ===
    43 
    44 Verified working in Windows 7 64-bit
    45 
    46 Did not test without installing Teltonika software
    47 
    48 Install software when prompted to.
    49 
    50 === Mac OS ===
    51 
    52 Verified working under Lion
    53 
    54 TODO.
    55 
    56 == Settings ==
    57 
    58 After the device is set up, the USB device will appear as a wired Ethernet device with the, dhcp release, IP address of 192.168.0.x.
    59 
    60 1.  Favorite browser ==> 192.168.0.1
    61     a.  To login, press ctrl+shift and click on the Teltonika logo on the top of the web page.  The default username for the administrative interface that we will be using is:[[BR]]
    62    Username:  admin[[BR]]
    63    Password:  EifAFKt8
    64 
    65 2.  Configure Wimax
    66     a.  Click on WiMAX tab
    67     b.  Click on Channels sub-tab
    68     c.  Add your base station(s) information
    69 3.  Verify connectivity
    70 
    71 Note that your settings are stored on the device, so this will only have to be done once for each device.
    72 
    73 == Telnet ==
    74 1.  telnet 700
    75     a.  Notice that above the port is 700[[BR]]
    76    Username:  admin[[BR]]
    77    Password:  admin01
    78 
    79 2.  To make change to files (At your own risk of making a paper weight):
    80     a.  mount -o,remount,rw /
    81 
    82 == Data collection & Misc ==
    83 
    84 One tab I would like to point out is the CLI (command line interface) that you can run several commands to collect all kinds of information.  A list of commands can be viewed with the help command.  There is also more options that you can get by typing in 'setuser su' and then type help.
    85 
    86 Output of help command (as Normal user):
    87 {{{
    88 COMMAND HELP
    89 ============
    90     CMD   help                   Get help on commands
    91     RFC   resetRfcSdcDbgStats    reset rfcSdc dbg stats
    92     CBE   showMacUl              Show the MAC uplink configuration
    93     CBE   showMacDl              Show the MAC downlink configuration
    94     CBE   showMacFrame           Show the MAC frame configuration
    95     CBE   showMacStatsRx         Show MAC message reception statistics
    96     CBE   showSsCaps             Show negotiated capabilities of an SS
    97     CBE   showCaps               Show global capabilities
    98     CBE   setCaps                Set global capabilities
    99     CBE   setHarqCategory        Changes the *declared* HARQ category.
    100     CBE   loadCalibrationFromHost   Load calibration file from host
    101     CBE   showSf                 Show SF information
    102     CBE   createSf               Declare a SF in the local SFD
    103     CBE   changeSf               Change a SF in the local SFD
    104     CBE   deleteSf               Delete a SF in the local SFD
    105     CBE   setSfEnable            Enable/disable a SF in the local SFD
    106     CBE   showPhsSf              Show PHS rules for Sf creation
    107     CBE   createPhsSf            Create/change PHS rules for Sf creation
    108     CBE   deletePhsSf            Delete PHS rules for Sf creation
    109     CBE   setMii                 Set MII link configuration
    110     CBE   showMii                Show the MII configuration
    111     CBE   showTime               Show the current time
    112     CBE   filterLog              filter logging. Syntax is '(+/-)MOD[/SUB]'. '*' is supported at the end.
    113     CBE   enableLog              Enable logging. Syntax is 'MOD[/SUB]'.
    114     CBE   disableLog             Disable logging. Syntax is 'MOD[/SUB]'.
    115     CBE   showLog                show logging state. Syntax is 'MOD[/SUB]'. '*' is supported
    116     CBE   suppressLogWarnings    Enable/Disable warnings from disabled logs
    117     CBE   enableSniffer          enable packet sniffing
    118     CBE   setSnifferVerbose      set verbose level for the packet dumping
    119     CBE   setSnifferParams       set the sniffer parameters
    120     CBE   disableSniffer         disable packet sniffing
    121     CBE   showSniffer            show sniffer state and filters
    122     CBE   clearSnifferFilters    clear all sniffer filters
    123     CBE   createSnifferFilter    create a new sniffer filter
    124     CBE   deleteSnifferFilter    remove the specified filter from the sniffer
    125     CBE   showMacAddress         Show the mac address
    126     CBE   setFatalErrorMode      Set value of fatal error mode
    127     CBE   showFatalErrorMode     Show value of fatal error mode
    128     CBE   showPkmCs              Show pkm settings related to crypto suites
    129     CBE   setPkmCs               Set pkm settings related to crypto suites
    130     CBE   showNeighborBs         Display a neighbor BS descriptor from the handover database
    131     CBE   showPsc                Show the Power Saving Classes information
    132     CBE   createPsc              Declare a PSC in the local PSCD
    133     CBE   changeSleepId          Modify a PSC config
    134     CBE   modifyPsc              Modify a PSC config
    135     CBE   deletePsc              Delete a PSC from the PSC database
    136     CBE   activatePsc            Activate a PSC
    137     CBE   deactivatePsc          Deactivate a PSC
    138     CBES  setQosRedUlDefaultProfile   Configure the uplink RED drop profile for Sf without max latency
    139     CBES  setQosRedUlMaxLatencyProfile   Configure the uplink RED drop profile for Sf with non null max latency
    140     CBES  setQosRedUlDefault     Configure congestion control in uplink for Sf without max latency
    141     CBES  showQosUl              Show Ul Qos configuration
    142     CBES  showSsPhyStatsDl       display the downlink physical statistics
    143     CBES  startSs                start the 802.16 MAC
    144     CBES  stopSs                 stop the 802.16 MAC
    145     CBES  resetSs                stop and restart the 802.16 MAC
    146     CBES  showSs                 Show SS information
    147     CBES  performHandover        Jump to a neighbor BS (small cell jump)
    148     CBES  requestPowerModeChange   Request power control mode change
    149     CBES  setTxPower             Set TX power to specified value
    150     CBES  setMaxTxPower          set Max Tx Power
    151     CBES  showSsAuth             Show SS Authorization
    152     CBES  resetSsAuth            reset SS Authorization
    153     CBES  showSa                 Show Security Association
    154     CBES  showRfRx               Show the radio frequency receiver configuration
    155     CBES  showRfTx               Show the radio frequency transmitter configuration
    156     CBES  showRfConfig           Show radio frequency configuration
    157     CBES  showLinkAdaptationDl   Show the downlink adaptation configuration
    158     CBES  setLinkAdaptationDl    Configures the downlink adaptation
    159     CBES  showPhyStatsRx         Show the downlink physical stats
    160     CBES  setRfTx                Set radio frequency / base band parameters for TX
    161     CBES  showPacketFlow         Show the packet flow statistics
    162     CBES  resetPacketFlow        Reset the packet flow statistics
    163     CBES  showVersion            Show the system version
    164     CBES  setGpiosState          Set the state of GPIO manager
    165     CBES  setIdleMode            Start IDLE mode
    166     CBES  showProvisionedPsc     Show the provisioned Power Saving Class config
    167     CBES  setProvisionedPsc      Set the full provisioned Power Saving Class config
    168     CBES  modifyProvisionedPsc   Modify some param of the provisioned Power Saving Class config
    169     CBES  crashMeNow             test delivery of fatals
    170     CBES  sendRssiToHost         test delivery of rssi level changes notifications to host via THP
    171     CBES  enableSendingRssiToHost   test enable the sending of RSSI range
    172     CBES  setDebugAsicOutput     Configure the ASIC debug output signals
    173     CBES  setScanning            Configure periodic scanning
    174     CBES  showScanning           Display periodic scanning parameters
    175     CBES  setHandover            Configure handover trigger
    176     CBES  showHandover           Display handover trigger parameters
    177     CBES  showNeighborBsStat     Diplay statistics of neighbor BS
    178     CBES  setIotMode             set IOT mode
    179     CBES  showIotMode            show the current IOT mode
    180     CBES  enableMrctMs11         Enable MRCT MS-11.1 MS-11.2 compliance
    181     CBES  enableMrctMs05         Enable MRCT MS-05.1 MS-05.2 compliance
    182     CBES  setDeviceMode          set DEVICE mode
    183     CBES  showDeviceMode         show the current DEVICE mode
    184     CBES  addChannelToScanner    Add a new channel to the scanning list
    185     CBES  showScanner            Show the the scanning list
    186     CBES  removeChannelFromScanner   Remove a channel from the scanning list
    187     CBES  clearScannerChannels   Reset all scanner entries
    188     CBES  showHomeNsp            Display the current home NSP
    189     CBES  setHomeNsp             Set the home NSP with on NSP ID
    190     CBES  showProvisionedNAPs    Show the list of authorized and forbidden NAPs (CAPL)
    191     CBES  addProvisionedNAP      Add a provisioned Nap
    192     CBES  removeProvisionedNAP   Remove a provisioned Nap
    193     CBES  clearProvisionedNAPs   Clear the list of provisioned NAPs
    194     CBES  showProvisionedNSPs    Show the list of authorized and forbidden NSPs
    195     CBES  addProvisionedNSP      Add a provisioned NSP
    196     CBES  removeProvisionedNSP   Remove a provisioned NSP
    197     CBES  clearProvisionedNSPs   Clear the list of provisioned NSPs
    198     CBES  showNdssConfig         Show NDSS parameters.
    199     CBES  setNdssConfig          Set NDSS parameters.
    200     CBES  showDurationTimeout    Show scan duration timeout.
    201     CBES  setDurationTimeout     Set scan duration timeout.
    202     CBES  showHoldingTimeout     Show scan holding timeout.
    203     CBES  setHoldingTimeout      Set scan holding timeout.
    204     CBES  forceScanning          Forces scanning when NDSS is in Zzz mode
    205     CBES  connect                Forces connection to BS
    206     CBES  showPlatform           Show the configuration of the platform
    207     CBES  setWatchDog            Enable or Disable  watchdog
    208     CBES  showWatchDog           Show watchdog status
    209 }}}
    210