| | 1 | Notes on operating Test console: |
| | 2 | |
| | 3 | 1. SSH to outdoor |
| | 4 | 1. Turn on console, look for IP address. (currently 10.40.250.5) |
| | 5 | 1. SSH to console address, username native, PW: native101 |
| | 6 | 1. Open second window, navigate to console |
| | 7 | 1. on first window, tail /var/log/syslog (look for dhcpd) |
| | 8 | 1. Plug in node, watch for mac address to appear |
| | 9 | 1. edit /etc/dhcp/dhcpd.conf, change appropriate node CM to mac address shown |
| | 10 | 1. restart service (find out which one!) |
| | 11 | 1. power cycle node |
| | 12 | 1. turn node on from console, using FQDN (nodeX.geni.net) |
| | 13 | 1. get mac address again, put in node section for same node. |
| | 14 | 1. repeat for other nodes |
| | 15 | |
| | 16 | 1. use omf commands to do whatever, can test all new nodes |
| | 17 | |
| | 18 | 1. when Ivan returns, configure old cm for testing old nodes |
