Version 11 (modified by 10 years ago) ( diff ) | ,
---|
List of common Failure modes Internal/NodeFailureModes
Node Problems Log
Please keep track of any and all known problems with nodes here. If something is a quick fix (i.e. replace hard drive) please bold that entry. Once a node has been fixed to not delete it's entry, move it to fixed, along with a date stamp and what was fixed.
Issues
Grid
- 8-7: Bad HDD?
- 3-20: fails to check in during imaging
- 18-1: fails to check in during imaging
SB1
- Node 1 segfaults, check temperature issues
OLD
Known Bad
Please list all nodes that are known to fail imagining/inventory here along with suspected problems
- 19-1: Boots but segfaulted during run, then locked up. Possible memory or cpu overheating problems
- 19-3: No disk
- 19-4: Dead Disk
- 19-17: Likely a bad CM cable running to the back
Questionable
Fixed
List of Node Failures
1 = good, 0 = bad
Front Face # | Disk | Memory | CPU / Mother Board | Fan | Network | Solution / Notes |
1 | 1 | 1 | 1 | 1 | 1 | Dies in the middle of PXE: Additional Errors see here |
2 | 1 | 1 | 0 | 1 | 0 | Fails to pxe regardless of memory installed. |
3 | 1 | 1 | 0 | 1 | 0 | Fails to pxe regardless of memory installed. |
4 | 1 | 1 | 0 | 1 | 0 | Fails to pxe regardless of memory installed. |
Note:
See TracWiki
for help on using the wiki.