Orbit > OTG > OTF User Manual
OTF Howto
Command Line Options
Options could be only given at start time of OTF program
| name | usage | default | Possible values
|
| protocol | specify the protocol used by OTG program. | udp | raw, raw_libmac
|
| rxdev | Device Name of local host to receive | | eth0 ath0…
|
| dstfilter | filter packets with IP destination address | NULL | IP address (192.168.0.5)
|
| txdev | the device to transmit packets | | eth2, ath0…
|
| dstmacaddr | MAC address of the destination | | 12:4A:56:D0:E1:75
|
Options could be given at run-time for OTR
| name | usage
|
| exit | terminate and exit the program.
|
