| Version 1 (modified by , 20 years ago) ( diff ) | 
|---|
Orbit > OTG > Scripts Repository > forwarder.rb
require 'handler/prototype'
require 'handler/filter'
require 'handler/appDefinition'
p = Prototype.create("test:proto:forwarder")
p.name = "Forwarder"
p.description = "Nodes which forward packets"
p.defProperty('protocol', 'Protocol to use', 'raw')
p.defProperty('rxdev', 'hw interface to listen on', 'eth0')
p.defProperty('txdev', 'hw interaface to send', 'eth0')
p.defProperty('ipFilter', 'IP address of the destination', '12.0.0.6')
p.defProperty('nextHopMAC', 'HW (MAC) address of next-hop receiver', 'FF:FF:FF:FF:FF:FF')
otf = p.addApplication('otf', "test:app:otf")
otf.bindProperty('protocol')
otf.bindProperty('rxdev')
otf.bindProperty('txdev')
otf.bindProperty('dstfilter','ipFilter')
otf.bindProperty('dstmacaddr','nextHopMAC')
otf.addMeasurement('senderport',  Filter::TIME,
  {Filter::SAMPLE_SIZE => 1},
  [
    ['stream_no'],
    ['pkt_seqno'],
    ['pkt_size', Filter::SUM],
    ['gen_timestamp'],
    ['tx_timestamp']
  ]
otf.addMeasurement('receiverport',  Filter::TIME,
  {Filter::SAMPLE_SIZE => 1},
  [
    ['stream_no'],
    ['pkt_seqno'],
    ['sender_port'],    ['flow_no'],
    ['pkt_num_rcvd'],
    ['rcvd_pkt_size', Filter::SUM],
    ['rx_timestamp',  Filter::MEAN],
    ['rssi', Filter::MEAN],
    ['xmitrate']
  ]
)
if $0 == __FILE__
  p.to_xml.write($stdout, 2)
  puts
end
  Note:
 See   TracWiki
 for help on using the wiki.
    