Changes between Version 14 and Version 15 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase


Ignore:
Timestamp:
Sep 20, 2012, 4:56:17 PM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

    v14 v15  
    22
    33== Case Assembly ==
     4=== Bench Test ===
     5 1. Place unpacked motherboard on bench and connect power supply, monitor, and USB keyboard
     6 2. Connect hard drive to motherboard and power supply
     7 3. insert USB key for BIOS flashing and follow instructions as from specific motherboard page for BIOS flashing instruction
     8 4. Double check the following
     9  * No hauls on keyboard errors
     10  * Serial redirection (115200/8/N/1)
     11  * PXE enabled on ETH1
     12  * ETH1 PXE first device on boot list, hard drive should be the second
     13[[BR]]
    414=== Motherboard & Case Assembly ===
    515'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''[[BR]]
    6 ''' ALWAYS bench test the node before assembling the node into the case. This means placing it on the bench, attaching a monitor, power supply, and keyboard, and ensuring that the node boots properly. This is also a great time to flash the bios as needed.'''
    716==== Components ====
    817[[Image(ComponentList.jpg, 300)]]