Changes between Version 25 and Version 26 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase


Ignore:
Timestamp:
Jan 10, 2013, 11:21:16 PM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

    v25 v26  
    1 [[TOC(Hardware/fAssembly, Hardware/fAssembly/Case*, depth=4)]]
     1[[TOC(Hardware, Hardware/hNodes*, depth=5)]]
    22
    3 === Case Assembly ===
    4 ==== Bench Test ====
     3===== Case Assembly =====
     4====== Bench Test ======
    55 1. Place unpacked motherboard on bench and connect power supply, monitor, and USB keyboard
    66 2. Connect hard drive to motherboard and power supply
    … …  
    1212  * ETH1 PXE first device on boot list, hard drive should be the second
    1313[[BR]]
    14 ==== Motherboard & Case Assembly ====
     14====== Motherboard & Case Assembly ======
    1515'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''[[BR]]
    16 ===== Components =====
     16======= Components =======
    1717[[Image(ComponentList.jpg, 300)]] [[BR]]
    1818 || '''System''' ||  ||
    … …  
    4242[[BR]]
    4343[[BR]]
    44 ==== Main U chassis: ====
     44====== Main U chassis: ======
    4545 1. Install the wireless cards onto the motherboard first as it may be difficult to reach once the motherboard is in the case.
    4646  * Make sure to install any pigtails at this time as well
    … …  
    8787   * The rear of the top cover should go below the cap.
    8888
    89 ==== Antenna Placement ==== #Antenna
     89====== Antenna Placement ====== #Antenna
    9090This is a diagram of the proper antenna placement for all nodes.
    9191There are a total of 5 cards that can be placed in the Nodes. Since the node has only 1 mini-pci and 1  pci express slot however, there are only a few combinations of cards.