Changes between Version 28 and Version 29 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase


Ignore:
Timestamp:
Jan 11, 2013, 4:24:34 PM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

    v28 v29  
    1 [[TOC(Hardware/hNodes/cNodeVer3*, depth=5)]]
    2 
    31===== Case Assembly =====
     2[[TOC(Hardware,Hardware/hNodes*, depth=6)]]
    43''' Bench Test '''
    54 1. Place unpacked motherboard on bench and connect power supply, monitor, and USB keyboard
    … …  
    1211  * ETH1 PXE first device on boot list, hard drive should be the second
    1312[[BR]]
    14 ''' Motherboard & Case Assembly '''[[BR]]
     13====== Motherboard & Case Assembly ======
    1514//'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''//[[BR]][[BR]]
    16 ''' Components '''[[BR]]
     15====== Components ======
    1716[[Image(ComponentList.jpg, 300, align=center)]] [[BR]]
    1817 || '''System''' ||  ||
    … …  
    4241[[BR]]
    4342[[BR]]
    44 ''' Main U chassis: '''
     43====== Main U chassis ======
    4544 1. Install the wireless cards onto the motherboard first as it may be difficult to reach once the motherboard is in the case.
    4645  * Make sure to install any pigtails at this time as well
    … …  
    8786   * The rear of the top cover should go below the cap.
    8887
    89 ''' Antenna Placement '''
     88====== Antenna Placement ======
    9089This is a diagram of the proper antenna placement for all nodes.
    9190There are a total of 5 cards that can be placed in the Nodes. Since the node has only 1 mini-pci and 1  pci express slot however, there are only a few combinations of cards.