Changes between Version 40 and Version 41 of Other/Summer/2024/pD


Ignore:
Timestamp:
Aug 18, 2024, 7:31:37 PM (3 months ago)
Author:
samcheung
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Other/Summer/2024/pD

    v40 v41  
    77== Project Setup
    88
    9 On the transmission side
     9On the transmission side, connect your signal generator to your antenna and choose a frequency of your choice (901 MHz default).
    1010
    11 On the receiving side, hook up your RTL-SDR to your computer then run the Matlab script with the corresponding toolkits (Communications, RTL-SDR, etc.). The script should run with a periodogram and a output of detected frequency. There is a commented out section for temperature conversion that may or may not be accurate.
     11For the reflector
     12
     13On the receiving side, hook up your RTL-SDR to your computer then run the Matlab script with the corresponding toolkits (Communications, RTL-SDR, etc.). Remember to change the center frequency in the script (default 901 MHz). The script should run with a periodogram and a output of detected frequency. There is a commented out section for temperature conversion that may or may not be accurate.
    1214
    1315== Project Objective