| Version 2 (modified by , 13 years ago) ( diff ) |
|---|
Experiment Controller
Used to execute various experiments in the testbed domain. Invoked with omf command.
user@console:omf
Run a command on the testbed(s)
Usage: omf-5.4 [COMMAND] [ARGUMENT]...
Available COMMANDs:
help Print this help message or a specify command usage
exec Execute an experiment script
load Load a disk image on a given set of nodes
save Save a disk image from a given node into a file
tell Switch a given set of nodes ON/OFF or reboot them
stat Returns the status of a given set of nodes
To get more help on individual commands: 'omf-5.4 help [COMMAND]'
Examples:
omf-5.4 help exec Return usage/help for the 'exec' command
omf-5.4 help load Return usage/help for the 'load' command
exec
user@console: omf help exec
OMF Experiment Controller 5.4 (git 9ac2ff9)
Execute an experiment script
Usage: exec [OPTIONS] ExperimentName [-- EXP_OPTIONS]
ExperimentName is the filename of the experiment script
[EXP_OPTIONS] are any options defined in the experiment script
[OPTIONS] are any of the following:
-a, --allow-missing Continue experiment even if some nodes did not check in
-C, --configfile FILE File containing local configuration parameters
-c, --config NAME Configuration section from the config file ('default' if omitted)
-d, --debug Operate in debug mode
-i, --interactive Run the experiment controller in interactive mode
-l, --libraries LIST Comma separated list of libraries to load (defaults to [system:exp:stdlib,system:exp:eventlib])
--log FILE File containing logging configuration information
-m, --message MESSAGE Message to add to experiment trace
-n, --just-print Print the commands that would be executed, but do not execute them
-p, --print URI Print to the console the content of the experiment resource URI
-o, --output-result FILE File to write final state information to
-e, --experiment-id EXPID Set the ID for this experiment, instead of the default standard ID
-O, --output-app Display STDOUT & STDERR output from the executed applications
-r, --reset If set, then reset (reboot) the nodes before the experiment
-S, --slice NAME Name of the Slice where this EC should operate
-s, --shutdown If set, then shut down resources at the end of an experiment
-t, --tags TAGS Comma separated list of tags to add to experiment trace
--oml-uri URI The URI to the OML server for this experiment
-x, --extra-libs LIST Comma separated list of libraries to load in addition to [system:exp:stdlib,system:exp:eventlib]
--slave-mode EXPID Run in slave mode in disconnected experiment, EXPID is the exp. ID
--slave-mode-resource NAME When in slave mode, NAME is the HRN of the resource for this EC
-h, --help Show this message
-v, --version Show the version
load
user@console:omf help load
Install a given disk image on the nodes in a testbed
Usage:
omf-5.4 load [-h] [-i IMAGE_PATH] [-o TIMEOUT] [-t TOPOLOGY] [-c AGGREGATE]
With:
-h, --help print this help message
-c, --config AGGREGATE use testbed AGGREGATE
-t, --topology TOPOLOGY a valid topology file or description (defaults to 'system:topo:all')
(if a file 'TOPOLOGY' doesn't exist, interpret it as a comma-separated list of nodes)
-i, --image IMAGE disk image to load
(default is 'baseline.ndz', the latest stable baseline image)
-o, --timeout TIMEOUT a duration (in sec.) after which imageNodes should stop waiting for
nodes that have not finished their image installation
(default is 800 sec, i.e. 13min 20sec)
--outpath PATH Path where the resulting Topologies should be saved
(default is '/tmp')
--outprefix PREFIX Prefix to use for naming the resulting Topologies
(default is your experiment ID)
Some Examples:
omf-5.4 load
omf-5.4 load -t system:topo:all -i baseline-2.4.ndz
omf-5.4 load -t omf.nicta.node1 -i wireless-2.6.ndz
omf-5.4 load -t omf.nicta.node1,omf.nicta.node2 -i baseline.ndz -o 400
omf-5.4 load -t system:topo:circle -i my_Own_Image.ndz
omf-5.4 load -t my_Own_Topology -i baseline-2.2.ndz -t 600 -c grid
omf-5.4 load -t my_Own_Topology --outpath ./ --outprefix my_Own_Prefix
save
omf-5.4 help save
Save a disk image from a given node into an archive file
Usage:
omf-5.4 save -n NODE [-h] [-c AGGREGATE]
With:
-h, --help print this help message
-n, --node NODE a valid description of a single node
(no default here, you have to enter a node!)
Some Examples:
omf-5.4 save -n omf.nicta.node1
omf-5.4 save -n omf.nicta.node3 -c grid
tell
user@console:omf help tell
Switch ON/OFF and reboot the nodes in a testbed
Usage:
omf-5.4 tell -a ACTION [-h] [-t TOPOLOGY] [-c AGGREGATE]
With:
-h, --help print this help message
-a, --action ACTION specify an action
ACTION:
on turn node(s) ON
offs turn node(s) OFF (soft)
offh turn node(s) OFF (hard)
reboot reboots node(s) (soft)
reset resets node(s) (hard)
-c, --config AGGREGATE use testbed AGGREGATE
-t, --topology TOPOLOGY a valid topology file or description (defaults to 'system:topo:all')
Some Examples:
omf-5.4 tell -a reset
omf-5.4 tell -a on -t system:topo:all -c grid
omf-5.4 tell -a reboot -t omf.nicta.node1
omf-5.4 tell -a offs -t omf.nicta.node1,omf.nicta.node2 -c sb1
omf-5.4 tell -a offh -t system:topo:all
omf-5.4 tell -a reset -t topo_grid_active
stat
user@console:omf-5.4 help stat
Returns the status of the nodes in a testbed
Usage:
omf-5.4 stat [-h] [-s] [-t TOPOLOGY] [-c AGGREGATE]
With:
-h, --help print this help message
-s, --summary print a summary of the node status for the testbed
-c, --config AGGREGATE use testbed AGGREGATE
-t, --topology TOPOLOGY a valid topology file or description (defaults to 'system:topo:all')
Some Examples:
omf-5.4 stat
omf-5.4 stat -s
omf-5.4 stat -t omf.nicta.node1,omf.nicta.node2 -c sb1
omf-5.4 stat -t system:topo:all -c grid
For example:
user@console.outdoor:~# omf stat INFO NodeHandler: OMF Experiment Controller 5.4 (git 6d34264) INFO NodeHandler: Slice ID: default_slice (default) INFO NodeHandler: Experiment ID: default_slice-2012-10-14t14.42.15-04.00 INFO NodeHandler: Message authentication is disabled INFO Experiment: load system:exp:stdlib INFO property.resetDelay: value = 210 (Fixnum) INFO property.resetTries: value = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load system:exp:stat INFO Topology: Loading topology ''. INFO property.nodes: value = "system:topo:all" (String) INFO property.summary: value = false (FalseClass) INFO Topology: Loading topology 'system:topo:all'. Talking to the CMC service, please wait ----------------------------------------------- Domain: outdoor.orbit-lab.org Node: node3-6.outdoor.orbit-lab.org State: NOT REGISTERED Node: node3-3.outdoor.orbit-lab.org State: POWEROFF Node: node2-10.outdoor.orbit-lab.org State: POWEROFF Node: node1-10.outdoor.orbit-lab.org State: POWEROFF Node: node1-8.outdoor.orbit-lab.org State: POWERON Node: node1-6.outdoor.orbit-lab.org State: POWERON Node: node3-2.outdoor.orbit-lab.org State: POWEROFF Node: node3-1.outdoor.orbit-lab.org State: POWEROFF Node: node1-3.outdoor.orbit-lab.org State: POWERON Node: node3-5.outdoor.orbit-lab.org State: POWEROFF Node: node2-5.outdoor.orbit-lab.org State: NOT REGISTERED Node: node1-2.outdoor.orbit-lab.org State: POWERON ----------------------------------------------- INFO Experiment: Switching ON resources which are OFF INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO run: Experiment default_slice-2012-10-14t14.42.15-04.00 finished after 0:6
Note:
See TracWiki
for help on using the wiki.
