Changes between Version 10 and Version 11 of Software/eAM/aInventory/fScheduler

Timestamp:

Jan 25, 2016, 2:30:10 AM (10 years ago)

Author:

seskar

Comment:

—

Software/eAM/aInventory/fScheduler

@@ -1 @@
-[[TOC(Software/eAM/aI*, depth=4)]]
+[[TOC(Software/eAM*, depth=2, heading=Aggregate Managers)]]
+
+[[TOC(Software/eAM/aI*, depth=4, heading=Inventory AM)]]
 
 === Domain management ===
@@ -30 +32 @@
 }}}
 
-
-==== Updating testbed information ====
+==== Updating Scheduler Database ====
 To change testbed name, make it active and change list of nodes do the following:
 
-===== Scheduler database =====
  * Make domain active in scheduler database i.e set status to 'a':
 {{{
@@ -49 +49 @@
 }}}
 
-===== Inventory database initialization and management =====
+==== Updating Inventory Database ====
 
+Core of is the '''mkinv''' with commands: '''add''', '''delete''', '''rename''' and '''swap'''
+{{{
+/usr/share/omf-aggmgr-5.4/omf-aggmgr/ogs_inventory/scripts# ./mkinv --help
+Command that manages inventory
+Usage:
+      mkinv CMD [options] file1 file2 file3
+ 
+      With: 
+      CMD                       mandatory command - one of: add,delete,rename,swap
+      Options:
+      -o, --orbit               ORBIT fqdn to ip mapping
+      -g, --geni                GENI fqdn to ip mapping
+      -b, --backup              backup inventory database before applying changes
+      -h, --help                print this help message
+      -d, --debug               turns on debugging
+      -u, --url URL             inventory AM url
+      Files:
+        one or more yaml configuration files
+
+}}}
+
+===== add - add a number of nodes ======
+
+Configuration file example for adding 3 nodes: nodeA, nodeB and nodeC to domain '''outdoor.orbit-lab.org''':
+
+{{{
+---
+domains: 
+  grid.orbit-lab.org:
+    nodes:
+      nodeA.outdoor.orbit-lab.org:
+        CM_type: 3 
+      nodeB.outdoor.orbit-lab.org:
+        CM_type: 3
+      nodeC.outdoor.orbit-lab.org:
+        CM_type: 3 
+
+}}}
+
+With this configuration saved in file '''file1.yaml''' nodes are added with:
+
+{{{
+./mkinv add -o file1.yaml
+}}}
+
+===== delete - delete a number of nodes =====
+
+Configuration file example for deleting nodeA and nodeB from '''grid.orbit-lab.org''' domain:
+
+{{{
+---
+domains: 
+  grid.orbit-lab.org:
+    nodes:
+      nodeA.grid.orbit-lab.org:
+        CM_type: X 
+     nodeB.grid.orbit-lab.org:
+        CM_type: X
+}}}
+
+
+{{{
+./mkinv delete file.yaml
+}}}
+===== rename - rename a number of nodes =====
+===== swap - swap a number of node pairs =====
+
+Default attributes are configured in '''inv-defatt.yml''' file; three sections: global attributes are in '''attributes''' section, domain specific overrides are in '''domains''' section; '''mandatory''' section lists mandatory attributes that should be present when adding the resource/node.
+
+{{{
+# NOTE: use only 'spaces' to indent !
+# ('tab' indents are not supported by the ruby yaml parser used to read this file)
+#
+#
+---
+# Global attributes
+attributes:
+  CM_type: 3
+  CM_port: 1    
+  INF_data_switch_port_id: 0    
+  INF_control_switch_port_id: 0
+  INF_default_disk: /dev/sda
+  INF_pxe_image: omf-5.4   
+  INF_reset_timeout: 80   
+  INF_max_frisbee_rate: 700000000
+
+# Domain specific attributes      
+domains:
+  grid.orbit-lab.org:
+    INF_data_switch_port_id: 1
+
+# Mandatory attributes
+mandatory:
+  - "CM_type"
+  - "CM_ip"
+  - "CM_port"
+  - "CM_mac"
+  - "INF_x_coor" 
+  - "INF_y_coor" 
+  - "INF_control_ip"
+  - "INF_control_mac"
+  - "INF_default_disk"
+  - "INF_pxe_image"
+}}}
+
+==== Updating Topologies ====
+
+
+'''mktopo'''