Changes between Version 7 and Version 8 of Tutorials/g0WmLTE/Tutorial3

Timestamp:

Dec 1, 2016, 3:35:31 AM (8 years ago)

Author:

seskar

Comment:

—

Tutorials/g0WmLTE/Tutorial3

@@ -11 +11 @@
 === Set up ===
 
-As a first step of this tutorial you need to[[CollapsibleStart(create grid reservation)]][[Include(Documentation/Short/CreateRes)]][[CollapsibleEnd]]and get it approved by the  [wiki:Documentation/Scheduler reservation service]. After receiving the reservation's confirmation (approval) email you need to prepare the nodes that will be used for this tutorial:
+ 1.  [[CollapsibleStart(Create grid reservation)]][[Include(Documentation/Short/CreateRes)]][[CollapsibleEnd]]
+ 2.  [[CollapsibleStart(Login into reserved domain: ssh your_user_name@grid.orbit-lab.org)]][[Include(Documentation/Short/Login)]][[CollapsibleEnd]]
+ 3.  [[CollapsibleStart(Load an image on the nodes: omf load -i baseline.ndz -t node1-7,node7-1)]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
+ 4.  [[CollapsibleStart(Turn on the nodes: omf tell -a on -t system:topo:imaged)]] [[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]] 
 
-[[CollapsibleStart(Login into reserved domain: ssh username@grid.orbit-lab.org)]][[Include(Documentation/Short/Login)]][[CollapsibleEnd]]
-[[CollapsibleStart(Load an image on the nodes: omf load -i baseline.ndz -t node1-7,node7-1)]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
-Turn the nodes back on [[CollapsibleStart(Turn on the nodes: omf tell -a on -t system:topo:imaged)]] [[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]] (give them some time and check their status with '''omf stat''' before proceeding).
-
-Access the node with:
+Wait for nodes to boot up (30-40 seconds) and then ssh into them (don;t forget that, in case of baseline image, you are accessing nodes as 'root' user without password:
 {{{
 ssh root@node1-7