Changes between Version 11 and Version 12 of Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial1

Timestamp:

Oct 1, 2016, 2:18:44 PM (8 years ago)

Author:

msherman

Comment:

—

Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial1

@@ -9 +9 @@
 We will use the following resources:
 * node18-2.grid.orbit-lab.org as the RRH
-* node18-1.grid.orbit-lab.org as the eNB
+* node18-19.grid.orbit-lab.org as the eNB
 * node1-7.grid.orbit.lab.org as a client
 
 
 1. Execute the following commands on the grid console, from separate ssh sessions (They can be done at the same time)
- 1. {{{ omf load -t node18-2,node18-1 -i oai-rrh.ndz }}}
+ 1. {{{ omf load -t node18-2,node18-19 -i oai-rrh.ndz }}}
  1. {{{ omf load -t node19-3 }}}
 1. After they are imaged, turn the nodes on
- 1. {{{ omf tell -a on -t node18-2,node18-1,node19-3 }}}
+ 1. {{{ omf tell -a on -t node18-2,node18-19,node19-3 }}}
 1. Open a ssh session to each device
  1. {{{ ssh root@node18-2.grid.orbit-lab.org }}}
- 1. {{{ ssh root@node18-1.grid.orbit-lab.org }}}
+ 1. {{{ ssh root@node18-19.grid.orbit-lab.org }}}
  1. {{{ ssh root@node19-3.grid.orbit-lab.org }}}
 1. On node18-2
  1. Run script {{{ ./quickbuild_rrh.sh }}}
  1. Run script {{{ ./run_rrh.sh }}}
-1. On node18-1
+1. On node18-19
  1. Run script {{{ ./quickbuild_enb.sh }}}
  1. Run script {{{ ./run_enb.sh }}}