Changes between Version 14 and Version 15 of Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial2

Timestamp:

Nov 18, 2016, 6:27:42 PM (8 years ago)

Author:

msherman

Comment:

—

Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial2

@@ -35 +35 @@
   1. {{{sudo /opt/openairinterface5g/cmake_targets/lte_build_oai/build/lte-softmodem -O /opt/conf/enb.band25.tm1.rrh.usrpb210.conf}}}
    1. which is to launch the softmodem with a known good configuration file. 
-   1. Add the {{{-x}}} flag to use visualizations over X11 forwarding.
+   1. Add the {{{-d}}} flag to use visualizations over X11 forwarding.
    1. To use a different grid node as the RRH, you must edit the config file line {{{ remote_address = "10.10.3.2";}}} to the appropriate IP.
  1. After executing both run scripts, you should see the RRH node load a USRP image, and the eNB node start printing log messages.