| Version 1 (modified by , 10 years ago) ( diff ) |
|---|
OpenAirInterface LTE
Prerequisites
This tutorial series assumes you have an ORBIT account, have scheduled a session on the ORBIT testbed, are familiar with SSH'ing into the testbed itself, and are familiar with the basics of running ORBIT experiments. If you have not done these things yet, you may wish to do so before taking a look at this slightly more advanced experiment. If you are unfamiliar with or are entirely new to ORBIT, you may wish to start here.
This tutorial also assumes basic familiarity with LTE standard. It uses OpenAirInterface open source software implementation of LTE basestation (eNodeB or eNB) and modem (user equipment or UE) developed at Eurecom.
Prepare the testbed
Load an image on the nodes: "omf load -i -t inventory:topo:B210"
Load an Image
- Before we begin using the nodes, it's a good idea to check their status first. This is done with the omf stat command.
omf stat
This omf command is used to display the power status of the node/domain.
Usage: omf stat
username@consoles.outdoor:omf stat Returns the status of the nodes in a testbed Usage: omf-5.4 stat [-h] [-s] [-t TOPOLOGY] [-c AGGREGATE] With: -h, --help print this help message -s, --summary print a summary of the node status for the testbed -c, --config AGGREGATE use testbed AGGREGATE -t, --topology TOPOLOGY a valid topology file or description (defaults to 'system:topo:all') Some Examples: omf-5.4 stat omf-5.4 stat -s omf-5.4 stat -t omf.nicta.node1,omf.nicta.node2 -c sb1 omf-5.4 stat -t system:topo:all -c gridIndividual nodes are identified in the output of stat command by their fully qualified domain name (FQDN). This establishes their "coordinates" and the "domain" to which they belong. Nodes in different domains typically can NOT see each other. Node can be in 1 of 3 states:
POWEROFF Node is Available for use but turned off POWERON Node is Available and is on NOT REGISTERED Node is not Available for use Example: omf stat on the outdoor domain
user@console.outdoor:~# omf stat -t all INFO NodeHandler: OMF Experiment Controller 5.4 (git 6d34264) INFO NodeHandler: Slice ID: default_slice (default) INFO NodeHandler: Experiment ID: default_slice-2012-10-14t14.42.15-04.00 INFO NodeHandler: Message authentication is disabled INFO Experiment: load system:exp:stdlib INFO property.resetDelay: value = 210 (Fixnum) INFO property.resetTries: value = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load system:exp:stat INFO Topology: Loading topology ''. INFO property.nodes: value = "system:topo:all" (String) INFO property.summary: value = false (FalseClass) INFO Topology: Loading topology 'system:topo:all'. Talking to the CMC service, please wait ----------------------------------------------- Domain: outdoor.orbit-lab.org Node: node3-6.outdoor.orbit-lab.org State: NOT REGISTERED Node: node3-3.outdoor.orbit-lab.org State: POWEROFF Node: node2-10.outdoor.orbit-lab.org State: POWEROFF Node: node1-10.outdoor.orbit-lab.org State: POWEROFF Node: node1-8.outdoor.orbit-lab.org State: POWERON Node: node1-6.outdoor.orbit-lab.org State: POWERON Node: node3-2.outdoor.orbit-lab.org State: POWEROFF Node: node3-1.outdoor.orbit-lab.org State: POWEROFF Node: node1-3.outdoor.orbit-lab.org State: POWERON Node: node3-5.outdoor.orbit-lab.org State: POWEROFF Node: node2-5.outdoor.orbit-lab.org State: NOT REGISTERED Node: node1-2.outdoor.orbit-lab.org State: POWERON ----------------------------------------------- INFO Experiment: Switching ON resources which are OFF INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO run: Experiment default_slice-2012-10-14t14.42.15-04.00 finished after 0:6
- It is recommended that the node be in the POWEROFF state prior to any experiment process. If the node is in the POWERON state you can use the omf tell command to get the node into the off state.
omf tell
OMF command to control the power state/reset the nodes.
Usage: omf tell
user@console:omf tell Switch ON/OFF and reboot the nodes in a testbed Usage: omf tell [-h] -t TOPOLOGY -a ACTION [-c AGGREGATE] With: -h, --help print this help message -a, --action ACTION specify an action ACTION: on turn node(s) ON offs turn node(s) OFF (soft) offh turn node(s) OFF (hard) reboot reboots node(s) (soft) reset resets node(s) (hard) -h, --help print this help message -t, --topology TOPOLOGY a valid topology file or description (MANDATORY) -c, --config AGGREGATE use testbed AGGREGATE Some Examples: omf tell -a reset -t node1-1.grid.orbit-lab.org omf tell -a on -t system:topo:all -c grid omf tell -a reboot -t node1-1 omf tell -a offh -t [1..2,1..5] omf tell -a offh -t system:topo:all omf tell -a reset -t system:topo:imagedThe commands are: on, offh (equivalent to pulling out the power cord), offs (software shutdown), reboot (software reboot) and reset (hardware reset).
Example: turn off node1-1 on the outdoor domain
user@console.outdoor:~# omf tell -a offh -t node1-1 INFO NodeHandler: OMF Experiment Controller 5.4 (git 3fb37b9) INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/ INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/ INFO NodeHandler: Slice ID: default_slice (default) INFO NodeHandler: Experiment ID: default_slice-2014-09-30t00.24.28.504-04.00 INFO NodeHandler: Message authentication is disabled INFO Experiment: load system:exp:stdlib INFO property.resetDelay: resetDelay = 230 (Fixnum) INFO property.resetTries: resetTries = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load system:exp:winlib INFO Experiment: load system:exp:tell INFO property.nodes: nodes = "node1-1" (String) INFO property.command: command = "offh" (String) Talking to the CMC service, please wait ----------------------------------------------- Node: node1-1.outdoor.orbit-lab.org Reply: OK ----------------------------------------------- INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO run: Experiment default_slice-2014-09-30t00.24.28.504-04.00 finished after 0:10
- Once node set is on an POWEROFF state, load an image with omf load command
omf load
Load command is used to put an image onto the hard disk of the node.
Usage: omf load
Install a given disk image on the nodes in a testbed Usage: omf-5.4 load [-h] [-i IMAGE_PATH] [-o TIMEOUT] [-t TOPOLOGY] [-c AGGREGATE] With: -h, --help print this help message -c, --config AGGREGATE use testbed AGGREGATE -t, --topology TOPOLOGY a valid topology file or description (defaults to 'system:topo:all') (if a file 'TOPOLOGY' doesn't exist, interpret it as a comma-separated list of nodes) -i, --image IMAGE disk image to load (default is 'baseline.ndz', the latest stable baseline image) -o, --timeout TIMEOUT a duration (in sec.) after which imageNodes should stop waiting for nodes that have not finished their image installation (default is 800 sec, i.e. 13min 20sec) --outpath PATH Path where the resulting Topologies should be saved (default is '/tmp') --outprefix PREFIX Prefix to use for naming the resulting Topologies (default is your experiment ID) Some Examples: omf-5.4 load omf-5.4 load -t system:topo:all -i baseline-2.4.ndz omf-5.4 load -t omf.nicta.node1 -i wireless-2.6.ndz omf-5.4 load -t omf.nicta.node1,omf.nicta.node2 -i baseline.ndz -o 400 omf-5.4 load -t system:topo:circle -i my_Own_Image.ndz omf-5.4 load -t my_Own_Topology -i baseline-2.2.ndz -t 600 -c grid omf-5.4 load -t my_Own_Topology --outpath ./ --outprefix my_Own_PrefixTwo important arguments are TOPOLOGY describing the set of nodes one wishes to image , and !IMAGE specifying the name of the image one wants to load the nodes with. If the imaging process does not does not finish within the default timeout period, that period can be increase by using the -o flag (e.g. -o 1600). Typical command to load both nodes of sandbox 1 with the baseline image would look like:
If the node is in the NOT REGISTERED state, you may need to wait for it to recover the POWEROFF state (it some times requires a few moments for the services to sync up). If the node takes more than 60 seconds to come out of the NODE NOT AVAILABLE state please report it to an administrator.Example: omf load-i baseline.ndz -t node1-1
username@console.sb3:~$ omf load -i baseline.ndz -t node1-1 DEBUG FQDN:console.sb3.orbit-lab.org: INFO NodeHandler: OMF Experiment Controller 5.4 (git 861d645) INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/ INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/ INFO NodeHandler: Add domain http - http://external1.orbit-lab.org:5054/ INFO NodeHandler: Slice ID: pxe_slice INFO NodeHandler: Experiment ID: pxe_slice-2018-08-08t13.41.37.814-04.00 INFO NodeHandler: Message authentication is disabled INFO Experiment: load system:exp:stdlib INFO property.resetDelay: resetDelay = 230 (Fixnum) INFO property.resetTries: resetTries = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load system:exp:winlib INFO Experiment: load system:exp:imageNode INFO property.nodes: nodes = "node1-1" (String) INFO property.image: image = "baseline.ndz" (String) INFO property.domain: domain = "sb3.orbit-lab.org" (String) INFO property.outpath: outpath = "/tmp" (String) INFO property.outprefix: outprefix = "pxe_slice-2018-08-08t13.41.37.814-04.00" (String) INFO property.timeout: timeout = 800 (Fixnum) INFO property.resize: resize = nil (NilClass) INFO Topology: Loaded topology 'system:topo:registered'. INFO property.resetDelay: resetDelay = 100 (Fixnum) INFO Experiment: Resetting resources INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [0 sec.] INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [10 sec.] INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [20 sec.] INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [30 sec.] INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [40 sec.] INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [50 sec.] INFO exp: Progress(0/0/1): 0/0/0 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 790 sec. INFO ALL_UP: Event triggered. Starting the associated tasks. INFO BRING_UP: Event triggered. Starting the associated tasks. INFO Experiment: Bringing up resources INFO exp: Progress(0/0/1): 50/50/50 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 780 sec. INFO exp: Progress(0/0/1): 80/80/80 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 770 sec. INFO exp: Progress(1/0/1): 100/100/100 min()/avg/max (59) - Timeout: 760 sec. INFO exp: ----------------------------- INFO exp: Imaging Process Done INFO exp: 1 node successfully imaged - Topology saved in '/tmp/pxe_slice-2018-08-08t13.41.37.814-04.00-topo-success.rb' INFO exp: ----------------------------- INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO NodeHandler: Shutdown flag is set - Turning Off the resources INFO run: Experiment pxe_slice-2018-08-08t13.41.37.814-04.00 finished after 1:44
- Before we begin using the nodes, it's a good idea to check their status first. This is done with the omf stat command.
Load the image with the OpenAirInterface code on the nodes that have USRP B210 attached. After imaging the nodes are turned off automatically.
Turn the nodes on: "omf tell -a on -t system:topo:imaged"
Turn the Nodes ON
To turn the nodes on use omf tell command:
omf tell
OMF command to control the power state/reset the nodes.
Usage: omf tell
user@console:omf tell Switch ON/OFF and reboot the nodes in a testbed Usage: omf tell [-h] -t TOPOLOGY -a ACTION [-c AGGREGATE] With: -h, --help print this help message -a, --action ACTION specify an action ACTION: on turn node(s) ON offs turn node(s) OFF (soft) offh turn node(s) OFF (hard) reboot reboots node(s) (soft) reset resets node(s) (hard) -h, --help print this help message -t, --topology TOPOLOGY a valid topology file or description (MANDATORY) -c, --config AGGREGATE use testbed AGGREGATE Some Examples: omf tell -a reset -t node1-1.grid.orbit-lab.org omf tell -a on -t system:topo:all -c grid omf tell -a reboot -t node1-1 omf tell -a offh -t [1..2,1..5] omf tell -a offh -t system:topo:all omf tell -a reset -t system:topo:imagedThe commands are: on, offh (equivalent to pulling out the power cord), offs (software shutdown), reboot (software reboot) and reset (hardware reset).
Example: turn off node1-1 on the outdoor domain
user@console.outdoor:~# omf tell -a offh -t node1-1 INFO NodeHandler: OMF Experiment Controller 5.4 (git 3fb37b9) INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/ INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/ INFO NodeHandler: Slice ID: default_slice (default) INFO NodeHandler: Experiment ID: default_slice-2014-09-30t00.24.28.504-04.00 INFO NodeHandler: Message authentication is disabled INFO Experiment: load system:exp:stdlib INFO property.resetDelay: resetDelay = 230 (Fixnum) INFO property.resetTries: resetTries = 1 (Fixnum) INFO Experiment: load system:exp:eventlib INFO Experiment: load system:exp:winlib INFO Experiment: load system:exp:tell INFO property.nodes: nodes = "node1-1" (String) INFO property.command: command = "offh" (String) Talking to the CMC service, please wait ----------------------------------------------- Node: node1-1.outdoor.orbit-lab.org Reply: OK ----------------------------------------------- INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks. INFO NodeHandler: INFO NodeHandler: Shutting down experiment, please wait... INFO NodeHandler: INFO run: Experiment default_slice-2014-09-30t00.24.28.504-04.00 finished after 0:10
Turn ON the nodes that successfully imaged (give them some time and check their status with omf stat before proceeding).
Note:
See TracWiki
for help on using the wiki.
