Changes between Version 8 and Version 9 of Tutorials/k0SDR/Tutorial05

Timestamp:

May 20, 2013, 10:53:34 PM (12 years ago)

Author:

nilanjan

Comment:

—

Tutorials/k0SDR/Tutorial05

@@ -1 @@
-= USRP2 configration and data collection with OEDL script =
+= USRP2 configuration and data collection with OEDL script =
 
 == Description ==
 In this tutorial we'll demonstrate exactly what the title says.
 
-== Hardware / Software Resourcesutilized ==
+== Hardware / Software Resources utilized ==
  1. 3 grid nodes with a USRP2 connect via Ethernet.
- 2. ''ubuntu-12-04-uhd-daemon.ndz'': node image with all the precompiled software required to configure the USRPs.
+ 2. ''ubuntu-12-04-uhd-daemon.ndz'': node image with all the pre-compiled software required to configure the USRPs.
  3. ''uhd_exp1.rb'' - OEDL script executed on the console. This script configures the USRPs for data collection at specified frequencies, sampling rate, etc...
  4. ''uhd_daemon'' - a node background process that bridges the gap between OMF commands and USRP2.
@@ -13 +13 @@
  * To get started first make a reservation on the [https://www.orbit-lab.org/schedule/ Orbit Scheduler].
 
- * Let's pick 3 nodes with a USRP2. For a current list of nodes with USRPs, goto the [https://www.orbit-lab.org/schedule/ Orbit Scheduler], click on ''Status Page'' under ''Quick Links''. Select the ''Grid'' Tab and filter by ''SDR'' and USRP_N210 or SBX. This will give a topology list of nodes (below) that can be used with the OMF commands:
+ * Let's pick 3 nodes with a USRP2. For a current list of nodes with USRPs, go to the [https://www.orbit-lab.org/schedule/ Orbit Scheduler], click on ''Status Page'' under ''Quick Links''. Select the ''Grid'' Tab and filter by ''SDR'' and USRP_N210 or SBX. This will give a topology list of nodes (below) that can be used with the OMF commands:
 {{{
 [node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org,