Changes between Version 8 and Version 9 of Tutorials/k0SDR/Tutorial21


Ignore:
Timestamp:
Mar 5, 2026, 3:47:12 PM (40 hours ago)
Author:
admin
Comment:

Update cPanel links to new portal URLs

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/k0SDR/Tutorial21

    v8 v9  
    33=== Description ===
    44
    5 This example shows how to run two concurrent streams (RX or TX) on a single USRP device using GNU Radio on Orbit Wireless Testbed. The example assumes usage of node 21-1 on the Grid, along with the USRP node 23-1. However, any node connected to a USRP X310 may be used instead. Information on SDR availability on particular nodes can be found on [https://www.orbit-lab.org/cPanel/controlPanel/start Orbit] by clicking on ''Status Page'', then on ''grid'', and then filtering the displayed nodes by SDR devices equipped.
     5This example shows how to run two concurrent streams (RX or TX) on a single USRP device using GNU Radio on Orbit Wireless Testbed. The example assumes usage of node 21-1 on the Grid, along with the USRP node 23-1. However, any node connected to a USRP X310 may be used instead. Information on SDR availability on particular nodes can be found on [https://www.cosmos-lab.org/portal/scheduler Orbit] by clicking on ''Status Page'', then on ''grid'', and then filtering the displayed nodes by SDR devices equipped.
    66
    77=== Set Up ===
    88
    9  1. Make a reservation on [https://www.orbit-lab.org/cPanel/controlPanel/start Orbit] to use the Grid.
     9 1. Make a reservation on [https://www.cosmos-lab.org/portal/scheduler Orbit] to use the Grid.
    1010 2. Make sure the node of interest is turned off:
    1111{{{username@console.grid:~$ omf tell -a offh -t node21-1}}}