| Version 43 (modified by , 17 years ago) ( diff ) |
|---|
Tutorial TOC
ORBIT Tutorials
Basic Tutorial
This section gives an introduction to the ORBIT testbed, its capabilities and its operations. It also presents the basic knowledge required to write and execute experiments for the testbed.
If you are new to the ORBIT testbeds, reading and running the tutorial in this section should help you getting started.
The first part of this tutorial briefly describes the ORBIT Testbed, its system architecture and its hardware and software components. The second part presents and describes a simple "Hello World" experiment with one sender and one receiver. The third and concluding part covers the collection an interpretation of measurements and results of an experiments on the ORBIT testbed.
- Brief tour of the Testbed
- First Experiment: the "Hello World" Example
- How measurements are collected
- How to post-process the measurements
More Tutorials
After completing the above basic tutorial, you should have a better understanding on using the ORBIT testbed to experiment your ideas, algorithms, or protocols. The list of tutorials in this second section explore further the various ORBIT functions that will help you to write and execute more advance experiments.
Finally, some more detailed information and references can be found on the Documentation page
Tutorials on controlling the testbed nodes
- How to install a disk image on the nodes of a Testbed
- How to query the status of the nodes of a Testbed
- How to switch On/Off the nodes of a Testbed
