Changes between Version 2 and Version 3 of DSP/Interpolation

Timestamp:

Aug 4, 2015, 6:35:32 AM (10 years ago)

Author:

dlambros

Comment:

—

DSP/Interpolation

@@ -54 +54 @@
 == Interpolation of a Sinusoidal Wave with Octave ==
 
+
+== Troubleshooting ==
+
+=== Audio Package ===
+If your receive an error stating that you don't have the audio package in Octave you will need to install the following package.
+
+{{{
+sudo octave
+pkg install -forge audio
+}}}
+
+If this tells you to install liboctave-dev, in a different terminal enter
+
+{{{
+sudo apt-get install liboctave-dev
+}}}
+
+then retry the above steps for package installation.
+
+To verify that you have the package installed you can enter
+
+{{{
+pkg list
+}}}
+
+and should see the following
+
+[[Image(pkglist.png, 650px)]]
+
+
+The audio package uses external software to play and record audio. The following should be sufficient.
+
+{{{
+sudo apt-get install sox
+}}}
+ 
+=== Signal Package ===
+If you receive the following error
+
+[[Image(fir1_err.png, 650px)]]
+
+you will need to install the signal package.
+
+To install the signal package you will need to use the following commands
+{{{
+sudo octave
+pkg install -forge signal
+}}}
+
+If you receive the following error:
+[[Image(signal_err.png, 650px)]]
+you will need to install the control package with the command
+{{{
+pkg install -forge control
+}}}
+Then redo the package installation for the signal package.