wiki:Hardware/bDomains/cSandboxes/aSB1

SB1

Table of Contents

  1. Hardware
    1. Domains
      1. Sandboxes
        1. SB1
          1. RF Connections
        1. SB2
          1. RF Connections
          2. Networking Setup (eth2)
          3. Using images based on baselines before June 12, 2017
          4. Resetting / Rebooting X310's
        1. SB3
        1. SB4
          1. Node to Node RF Path
          2. Node to WiMAX basestation RF Path
        1. SB5
        1. SB6
          1. CR-Kit
          2. Parallela Platform
          3. WARP
        1. SB7
        1. SB8
        1. SB9
          1. Data Switch Connections
          2. Procedures (Edge Core Wedge)

RF Connections

The B210's connected to the nodes in this sandbox are interconnected via coax cables as follows with a 30dB attenuator on the TX/RX side of each link for protection. This setup is designed to facilitate FDD dependent experiments.

Last modified 8 years ago Last modified on Nov 11, 2016, 8:21:04 PM

Attachments (1)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.