Changes between Version 29 and Version 30 of Hardware/fDevices/cSDR/gUSRP

Timestamp:

Sep 10, 2014, 7:57:34 PM (10 years ago)

Author:

msherman

Comment:

—

Hardware/fDevices/cSDR/gUSRP

@@ -5 +5 @@
 
 
-Majority  of SDR devices in ORBIT grid are various generations of [http://en.wikipedia.org/wiki/Universal_Software_Radio_Peripheral Universal Software Radio Peripherals (USRP)] . Each USRP, whether USB or Ethernet based, is attached to [wiki:Hardware/hNodes/cNodeVer3 genration 3 node] and is physically located on a small shelf immediately underneath the node (as shown in antenna figure beow). In case of USRP devices, the USB interface is attached to one of the USB2 ports on a corresponding node. For USRP2s (and N210s), the Ethernet interface of each device is connected to a (third) dedicated Ethernet interface on the node (eth2) that is used solely for USRP related communication. The nodes with USRP devices are distributed through the grid as shown in the [wiki:Hardware/fDevices/gUSRP#grid deployment table]. In addition to grid deployment two sandboxes are available for development: [wiki:Hardware/bDomains/cSandboxes/cSB3 sandbox3] is equipped with [wiki:Hardware/fDevices/gUSRP#sb3 two USRP2s], while [wiki:Hardware/bDomains/cSandboxes/eSB5 sanbox5] has [wiki:Hardware/fDevices/gUSRP#sb5 two USRPs] attached.   
+The majority  of SDR devices in the ORBIT grid are various generations of [http://en.wikipedia.org/wiki/Universal_Software_Radio_Peripheral Universal Software Radio Peripherals (USRP)] . Each USRP, whether USB or Ethernet based, is attached to a [wiki:Hardware/hNodes/cNodeVer3 generation 3 node] and is physically located on a small shelf immediately underneath the node (as shown in the antenna figure below). 
 
+In the case of USRP devices, the USB interface is attached to one of the USB2 ports on a corresponding node. For USRP2s (and N210s), the Ethernet interface of each device is connected to a (third) dedicated Ethernet interface on the node (eth2) that is used solely for USRP related communication. 
+
+The USRP X310s are attached to the new [wiki:Hardware/hNodes/cNodeVer4 generation 4 nodes]. They are attached to a 10 Gigabit NIC on the node via SFP+ direct attach cable, and are attached via fiber to our aggregate switch. (Note, fiber link is still undergoing testing/debugging.)
+
+The nodes with USRP devices are distributed through the grid as shown in the [wiki:Hardware/fDevices/gUSRP#grid deployment table]. In addition to grid deployment two sandboxes are available for development: [wiki:Hardware/bDomains/cSandboxes/cSB3 sandbox3] is equipped with [wiki:Hardware/fDevices/gUSRP#sb3 two USRP2s], while [wiki:Hardware/bDomains/cSandboxes/eSB5 sanbox5] has [wiki:Hardware/fDevices/gUSRP#sb5 two USRPs] attached.
  || Device || [https://www.ettus.com/product/details/USRP-PKG USRP] || [https://www.ettus.com/product/details/USRP-PKG USRP2 / USRP N210] || [https://www.ettus.com/product/details/X310-KIT USRP X310] || 
  || Photo || [[Image(IMG_2236.JPG, width=300, height=300)]] || [[Image(USRP2 Photo.jpg, width=300)]] || [[Image(08231316_650x650_1.jpg, width=300)]] ||
  || Vendor || [http://www.ettus.com/ Ettus Research] || [http://www.ettus.com/ Ettus Research] || [http://www.ettus.com/ Ettus Research] ||
- || Interface type || USB || Gigabit Ethernet || Dual 10 Gigabit Ethernet ||
+ || Interface type || USB || Gigabit Ethernet || Dual 10 Gigabit SFP+ ||
  || Device ID || fffe:0002 || eth2 || ||
- || Driver || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UDH] ||
+ || Driver || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] ||
 
 ==== Antenna Mounting ====