wiki:Hardware/hNodes/cNodeVer5

Version 3 (modified by seskar, 9 years ago) ( diff )

—

ORBIT Mobile Node (version 1)

Table of Contents

  1. Hardware
    1. Nodes
      1. ORBIT Node (Version 1)
        1. Orbit case 1
      1. ORBIT Node (Version 2)
        1. Orbit case 2
      1. ORBIT Node (version 3)
        1. Main Generation 3 Nodes
          1. LV-67C
          1. LV-67G
          1. LV-67J
        1. Mobile Generation 3 Nodes
          1. LV-67B
          1. LV-67F
          1. LV-67K
        1. Orbit case 3 (COTS)
        1. Assembly
          1. Case Assembly
          1. Mother Board BIOS Settings
      1. ORBIT Node (version 4)
        1. Main Generation 4 Nodes
        2. High Performance Generation 4 Nodes
        3. Large Core Count Generation 4 (SDR) Nodes
        1. Orbit case 4 (COTS)
        1. Assembly
          1. Case Assembly
        1. Debugging notes
      1. ORBIT Mobile Node (version 1)
        1. Hardware
          1. NUC ====
          2. SDR Front End
        2. Case Extension
          1. Assembly instructions

The mobile node is effectively a shrunk down version of the standard ORBIT node designed to facilitate mobile and off-site experiments. The current generation is based around the Intel Next Unit of Computing (NUC) platform.

Hardware

NUC ====

Two versions: big and small…

SDR Front End

The SDR front-end ​Ettus Research USRP B200mini is a full-duplex transceiver platform with tuning range of 70 MHz to 6 GHz with 56 MGHz of instantaneous bandwidth connected over USB 3.0 to the host. USRP B205

Case Extension

The "add-on" case extension to the NUC contains the B205 and CM. It is a 3D printable part (STL file​). Best results have been achieved using either ABS or HIPS filament.

Assembly instructions

Internal wiring No image "InternalConnections.png" attached to Hardware/hNodes/cNodeVer5

Assembled SDR Mobile Node

Assembled unit is hown in Figure 3.

Attachments (4)

Note: See TracWiki for help on using the wiki.