Changes between Version 8 and Version 9 of Hardware/jCM/dCM3/cSoftware


Ignore:
Timestamp:
Jun 12, 2011, 8:38:43 AM (13 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/cSoftware

    v8 v9  
    1  = Software Description =
     1[[TOC(Hardware/CM/*, depth=2)]]
    22
    3 == Requirements of Software ==
     3== Software Description ==
     4
     5=== Requirements of Software ===
    46
    57 * HTML node control
    … …  
    1315 * update over HTML command
    1416
    15 == I2C protocol ==
     17=== I2C protocol ===
    1618The lantronix Xport AR does not come with a native I2C bus to the I2C communication between the node ID box and the hardware monitor chip (DS1780E) must be accomplished through bit-banging. The configuration of the CM is that of one master and two slaves (NodeID box and DS1780E).
    1719
    1820   
    19 [wiki:Hardware/CM/cCM3/SoftwareDescription/Programming How to program the Lantronix module]
     21[wiki:Hardware/cCM/cCM3/SoftwareDescription/Programming How to program the Lantronix module]