| Version 4 (modified by , 9 years ago) ( diff ) |
|---|
Table of Contents
Antennas ¶
WiFi Antennas ¶
Multi-standard Antennas ¶
Electronically Steerable Antennas ¶
4 nodes with USRP X310 devaces in addition to standrad antennas (WiFI for two internal devices and Multi-standard paddle antennas for X310s) are equipped with.
The block of RF switches can be directly configured as follows if the standard available configurations are not sufficient (blanks indicate the particular switch state does not matter).
Configuration SW 1 SW 2 SW 3 SW 4 Node Wifi 0 → standard antenna RF 1 Node Wifi 0 → directional (FCI antenna) RF 2 RF 1 USRP RF A → standard antenna RF 1 USRP RF A → directional (FCI antenna) RF 2 RF 2 USRP RF B → standard antenna RF 1 USRP RF B → omni (FCI antenna) RF 2
Antenna Switching Hardware ¶
Directional Antenna AM Service is used to manage
Attachments (9)
-
ESA.jpg
(123.1 KB
) - added by 9 years ago.
Directional Antenna Mounting
-
DirAnt-1.0.jpg
(44.6 KB
) - added by 9 years ago.
Directional Antenna Switching
-
Ant1.png
(827.8 KB
) - added by 9 years ago.
Omni directional 2.4/5 GHz antenna
-
Ant2.png
(2.5 MB
) - added by 9 years ago.
Multi-band (4G) antenna
-
Ant1.pdf
(535.9 KB
) - added by 9 years ago.
WiFi Antenna Spec. Sheet
-
Ant2.pdf
(6.7 MB
) - added by 9 years ago.
Multi-band Antenna Spec Sheet
-
NodeWiFi.png
(127.4 KB
) - added by 9 years ago.
Node WiFi Antennas
-
MountingPlate.png
(9.5 KB
) - added by 9 years ago.
Multi-band Antenna Mounting Plate
- APAMSJ-137.pdf (2.0 MB ) - added by 9 years ago.
Note:
See TracWiki
for help on using the wiki.
