Current Status
- Image nodes with the latest Bluetooth enabled image
- Manually set the interfaces using pand, for instance
node1-1:~# pand --listen -role NAP --master --autozap
wait for at least 10 seconds for the interface to configure
node1-2:~# pand --connect 00:0A:3A:53:D4:82 --service NAP --autozap
Wait for at least 10 seconds for the interface to configure. At this point the link should be established and interface bnep<X> created on both nodes.
node1-2:~# ifconfig bnep0 192.168.1.2
node1-1:~# ifconfig bnep0 192.168.1.1
This step is automated by the script bt.pl.
- Execute your favorite script with proper settings for OTG and OTR with -k option in order not to reboot nodes and preserve manual settings. Assuming your script is btwifi.rb it will be something like
nodehandler4 -k btwifi
List of the nodes with BT interfaces
To Do
- Write btsender.rb and btreceiver.rb to fully integrate Bluetooth with OTG and OTR
Last modified
17 years ago
Last modified on Sep 23, 2007, 4:59:56 AM
Attachments (6)
-
btwifi.rb
(1.8 KB
) - added by 18 years ago.
Experiment script that runs Bluetooth and 802.11
-
bt.pl
(723 bytes
) - added by 18 years ago.
Perl script to setup Bluetooth connection - needed until Bluetooth is fully integrated with NodeHandler
-
wifi.pl
(511 bytes
) - added by 18 years ago.
Additional settings for 802.11 not available in NodeHandler
-
btwifi_grid.rb
(5.9 KB
) - added by 18 years ago.
Experiment script with 5 p2p BT connections and 11 wifi sending to an AP
-
bt_grid.pl
(3.5 KB
) - added by 18 years ago.
BT setup for btwifi_grid.rb
-
wifi_grid.pl
(4.1 KB
) - added by 18 years ago.
wifi setup for btwifi_grid.rb not supported by node handler
Download all attachments as: .zip
Note:
See TracWiki
for help on using the wiki.
