Changes between Version 4 and Version 5 of Internal/WiMAX/BTSSetup

Timestamp:

Jul 1, 2010, 2:40:06 PM (15 years ago)

Author:

Gautam D. Bhanage

Comment:

Replaced wiset command with the binary name for execution as a part of the script.

Internal/WiMAX/BTSSetup

@@ -8 +8 @@
   - Use wiset commands below to correct configuration on the BTS:
   {{{
-wiset authgw_id 0x41534E47
-wiset authgw_port 0x08B7
-wiset asngw_id 0x41534E4757303030
-wiset asngw_dp_port  0x08B7
-wiset asngw_ep_port 0x08B7
-wiset bs_rx_port 0x08B7
-wiset bsid 0x303030303030
-wiset frequency  2551500
-wiset bs_tx_power 40
-wiset bw_mode 0
-wiset dlul_ratio 2
-wiset ttg 296
-wiset rtg 168
-wiset framesync_mode 2
-wiset antenna_gain 0
+/usr/sbin/wimax/cmd_app 3 authgw_id 0x41534E4757303030
+/usr/sbin/wimax/cmd_app 3 authgw_port 0x08B7
+/usr/sbin/wimax/cmd_app 3 asngw_id 0x41534E4757303030
+/usr/sbin/wimax/cmd_app 3 asngw_dp_port  0x08B7
+/usr/sbin/wimax/cmd_app 3 asngw_ep_port 0x08B7
+/usr/sbin/wimax/cmd_app 3 bs_rx_port 0x08B7
+/usr/sbin/wimax/cmd_app 3 bsid 0x303030303030
+/usr/sbin/wimax/cmd_app 3 frequency  2551500
+/usr/sbin/wimax/cmd_app 3 bs_tx_power 40 
+/usr/sbin/wimax/cmd_app 3 bw_mode 0
+/usr/sbin/wimax/cmd_app 3 dlul_ratio 2
+/usr/sbin/wimax/cmd_app 3 ttg 296
+/usr/sbin/wimax/cmd_app 3 rtg 168
+/usr/sbin/wimax/cmd_app 3 framesync_mode 2
+/usr/sbin/wimax/cmd_app 3 antenna_gain 0
 
 # Other wiset commands changed to appropriately reflect new IP settings.
-wiset authgw_ip 0x0A030047
-wiset asngw_dp_ip 0x0A030047
-wiset asngw_ep_ip 0x0A030047
+/usr/sbin/wimax/cmd_app 3 authgw_ip 0x0A030047
+/usr/sbin/wimax/cmd_app 3 asngw_dp_ip 0x0A030047
+/usr/sbin/wimax/cmd_app 3 asngw_ep_ip 0x0A030047
 
   }}}