Changes between Version 4 and Version 5 of Old/Hardware/hNodes/cNodeVer3/dAssembly/bCM


Ignore:
Timestamp:
Sep 20, 2012, 3:12:19 PM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/bCM

    v4 v5  
    11 1. Wiring the CM:
    2   1. Attach the red and black power connector wires using the vampire clips to the purple and any black of the 24 pin ATX power supply connector respectively. See image below.[[BR]][[Image(http://www.orbit-lab.org/attachment/wiki/Hardware/fAssembly/LV67C/VampClip.jpg, 300)]]
     2  1. Attach the red and black power connector wires using the vampire clips to the purple and any black of the 24 pin ATX power supply connector respectively. See image below.[[BR]][[Image(source:http://www.orbit-lab.org/attachment/wiki/Hardware/fAssembly/LV67C/VampClip.jpg, 300)]]
    33  1. connect the red/black twisted pair cable to the motherboard, and the other end to the CM as shown in the pictures below. Do the same for the blue/black twisted wire pair. The header on the MB is next to the RAM and SATA connectors. [[BR]][[Image(CmWire.jpg, 300)]]
    44